0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which is better to adjust pH 1N HCl or conc HCl?
1N - conc will change the pH too quickly. You might want to consider 0.1molar for finer adjustments.
How do you turn 1N of HCL into 0.001N of HCL?
By dilution (1000x) with water: Take 1.0 mL 1.0N HCl and add up to 1000 mL with pure water.
What ions are responsible for te eletrical conductivity in the HCl aq?
H+ and Cl- Hydrochloric acid (HCl) is a strong electrolyte.
How to prepare 1N HCl solution?
1N HCl is also 1M HCl because it is mono-protic. Therefore 36.5 g of HCl is required per liter or 3.65%. Simply take 100 g of 37% HCl and make up to the 1 liter mark on the volumetric flask. Check the value by titration against 1M NaOH. It should be perfect. If very slightly strong dilute very slightly (calculate) with water and re-standardize.
What is difference between 1N HCL and 1M HCL?
they both are same as HCl is a monobasic acid.>>>Not exactly. N stands for normal and M stands for mole. Knowing that, read this article to know the difference:http://answers.yahoo.com/question/index?qid=20070625100319AALNjoW
How do you make 1N HCL from 1N HCL?
Take specific volume of 3N solution and increase the volume three times by adding distilled water.
Which is better to adjust pH 1N HCl or conc HCl?
1N - conc will change the pH too quickly. You might want to consider 0.1molar for finer adjustments.
Why dextrose has less conductivity than Hcl?
HCl is ionized, dextrose isn't.
How do you turn 1N of HCL into 0.001N of HCL?
By dilution (1000x) with water: Take 1.0 mL 1.0N HCl and add up to 1000 mL with pure water.
How do you prepare 1N Hcl solution Dont tell in gL how much ml is required?
1N HCL is the same as 1 Molar HCl. You take the # of H ions and multiply by the molarity to get the Normality. Usually you buy HCl in concentrated form which is 12 Molar or 12 Normal HCL. You need to dilute the concentrated HCl to get the reduced concentration. Use the formula Molarity Initial x Volume Initial = Molarity Final x Volume Final ex. 12 M HCL x 10 ml = 1 M x 120 ml. So take 10 ml of concentrated HCl and add enough water to make 120 ml. This will give you 120 ml of 1 M (which is 1N) HCl. Venkat Reddy
What ions are responsible for te eletrical conductivity in the HCl aq?
H+ and Cl- Hydrochloric acid (HCl) is a strong electrolyte.
How do you prepare 0.02 M of HCl?
Preparing 1N HCl for 1L. 1N=1M in HCl. Conc. HCl= 12M M1V1=M2V2 12*V1=1*1000 V1=1000/12 V1=83.33ml 1N HCl= 83.33ml of Conc. HCl in 1L of water 2N HCl= 167ml of Conc. HCl in 1L of water.
How to prepare 1N HCl solution?
1N HCl is also 1M HCl because it is mono-protic. Therefore 36.5 g of HCl is required per liter or 3.65%. Simply take 100 g of 37% HCl and make up to the 1 liter mark on the volumetric flask. Check the value by titration against 1M NaOH. It should be perfect. If very slightly strong dilute very slightly (calculate) with water and re-standardize.
What is difference between 1N HCL and 1M HCL?
they both are same as HCl is a monobasic acid.>>>Not exactly. N stands for normal and M stands for mole. Knowing that, read this article to know the difference:http://answers.yahoo.com/question/index?qid=20070625100319AALNjoW
How do you prepare the 10N HCl solution?
weigh out 365g of HCl pellets and dilute to 1 liter to prepare the 10N HCl solution. Reasons:N is short for NORMAL SOLUTIONS, The definition of a NORMAL SOLUTION is a solution that contains 1 gram equivalent weight (gEW) per liter solution. An equivalent weight is equal to the molecular weight divided by the valence (replaceable H ions). eg：1N NaCl = 58.5 g/L 1N HCl = 36.5 g/L 1N H2S04 = 49 g/L Problems involving normality are worked the same as those involving molarity but the valence must be considered: 1N HCL the MW= 36.5 the EW = 36.5 and 1N would be 36.5g/L 1N H2SO4 the MW = 98 the EW = 49 and 1N would be 49 g/L 1N H3PO4 the MW = 98 the EW = 32.7 and 1N would be 32.7 g/L so,u can weigh out 365g of HCl pellets and dilute to 1 liter to prepare the 10N HCl solution.
What solution shows more conductivity 2.00 M HCl or 1.00 M AlCl3?
1.00 M AlCl3 solution shows more conductivity due to presence of more charges on ions.
Why do you find acid normality why dont you take known normality of acid?
Acid solutions are typically made in laboratories from commercially available acids which are supplied with specifications as to their physical and chemical properties including their concentrations. Calculations: For example, if you wish to use concentrated HCl that just arrived in your lab yesterday to make (say) 1N HCl, you will need to know the normality of the available solution. Suppose you know that it is 37% HCl (and all other information is missing); this means 37 mL HCl in 100 mL solution, M.W. of HCl = 36.5, Density = 1.185; 1.185 g HCl occupies 1 mL volume, 37 mL HCl corresponds to 43.84 g HCl. If the commercially available solution is 43.84 g HCl in 100 mL solution and you know that 36.5 g HCl in 1000 mL solution makes 1N (also 1M HCl) solution, then you have a 12N (also 12M) solution in your hands. So that means you must dilute it 12 times to get a 1N HCl solution. Titration: If you don't have a new solution at hand and are not sure about how correctly the HCl reagent was stored over many years, it would be prudent to measure the concentration of acid by titration provided you have fresh (reliable) base solutions at hand and reliable indicators.
