Want this question answered?
Pipe class is a collection of most compatible components considering dimensional and material properties for the intended service over a range on pressure and temperature specified.
A swamping resistor is usually manufactured from the metal alloy manganin (trade name), or other alloy with similar resistance/temperature characteristics -i.e. practically zero temperature coefficient of resistance. In other words, its resistance will remain more-or-less constant over a wide range of temperature variation.
Carbon Steel is used upto 427 oC or upto 1100 oF.
As per API 6A temperature classification, -20 deg F to 250 deg F operating temperature range.
It also increases. It increases linearly with stress in the elastic range, then increass more rapidly once the material is plastic ( yielded).
At a defined temperature a liquid become semisolid and doesn't easily flow: this is the pour point. This is important to establish the temperature range in which this material can be used.
The highest temperature minus the lowest temperature is the temperature range. The temperature range is how many degrees is in between the highest and lowest temperatures.
explain the temperature annual range
the temperature range is -223 C to -220 C
Depends on both the exact material and the exact temperature. The amount of heat required to raise 1 gram of material X by one degree Celsius is called the specific heat of material X. It takes 1000 times as much thermal energy to raise 1 kilogram by one degree Celsius because 1 kilogram is 1000 times as much mass as 1 gram. This does not hold over phase changes, such as ice to water or water to steam, because any phase change requires energy just for the phase change. Further, if you use a sharp pencil, many materials have specific heat which changes depending on the material's exact temperature. So you need to know what material and what temperature range and for that material are there any phase changes at that temperature range.
It's a liquid over a fair range of temperatures and it expands and contracts noticeably with small changes in temperature.
The answer will depend on what material the sidewalk is made from and the maximum range in temperature.
It's a liquid over a fair range of temperatures and it expands and contracts noticeably with small changes in temperature.
If temperature increases the resistance will also increase. This is why a light bulb is a non ohmic conductor. As the light bulb filament gets hotter its resistance will increase.Additional CommentsIt depends upon the material involved. In general, for pure metal conductors an increase in temperature will cause their resistance to increase. For insulators, an increase in temperature will cause their resistance to decrease -which is why excessive temperature is often the main reason why insulation fails. Alloys can be manufactured that will maintain a relatively constant resistance over a wide range of temperatures.Temperature affects resistance indirectly. What is actually being affected is the material's resistivity. Resistivity is one of the factors that determines resistance.The resistance of any given material can be calculated over wide range of temperatures, using the temperature coefficient of resistance for that material.
There are many different waxes. Do you have any particular one in mind? Candle wax
The temperature range for Escanaba is between 75 degrees and 23 degrees
Inner of the sun Temperature is 14000°c and outer is 6000°c