on my 1994 acclaim the buttons that activate the cruise control are on the steering wheel (Note that the cruise cannot be engaged at all if you are traveling under 60kph). there should be a button that says "set" and under it will say "Decel". there will be a button beside that one that says "resume", "accel". when you want to use cruise control you must be traveling at least 60kph and hit the "set" button, the car will then keep its speed at the speed you were going when you hit the button. if you want to accelerate or decelerate momentarily then have the cruise take over again at the speed it was set at simply hold the "accel" or "Decel" button. to disengage the cruise completely just press the brake slightly and the cars speed will be under your control again. Check the clock spring behind steering wheel(have to pull wheel). I had a problem with the horns and C/C not working. Found that one mounting pin was cracked, causing erratic horn operation and no cruise control. Make sure road wheels are straight forward before removing/replacing spring.
Cruise control is an accessory.
It is possible to convert a car without cruise control to have cruise control. Many auto parts stores sell kits which will install cruise control in a vehicle.
There are several ways to fix the cruise control on your Mercedes-Benz depending on the problem with the cruise control. Make sure the fuse for the cruise control is not blown.
some places to look, check the decel/ set button for a fault, check the brake light switch near the brake pedal, check that the speedometer is not malfunctioning or showing a fluctuating speed
2004 sebring convertable cruise control not working - what to do?
There is no isolated fuse for the cruise control. It all runs off the 20A gauges fuse. If you are having trouble with the cruise control I would check the Cruise Control Module or the Cruise control Servo. What symptom is occurring?
If the cruise control on your 1987 300ZX does not work, you might have an issue with the cruise control fuse or wiring. You could also have a problem with the switch that turns the cruise control on and off.
To use the cruise control on the PT Cruiser, turn the cruise control on in the steering wheel. Accelerate to the desired speed and push in the end of the left turn signal knob. The cruise control should then control the speed. To take the car out of cruise control, a person can tap the brake.
no
The cruise control fuse can be found in the fuse box. The cruise control fuse will be at the bottom of the first column.
No. The cruise control will maintain the vehicle speed you have selected.