THE DIAMETER OF THE OUTSIDE OF THE PIPE TIMES PI TIMES THE LENGTH OF THE PIPE or D x Pi x L = A
0.2 x(dia of pipe)x(length of pipe) For examble if you have 100mm diameter pipe and 50 m length .. 0.2x0.1x50= 1 litre and this is your allowable value
ERW (Electric Resistance Welding) pipe is manufactured by rolling metal and then welding it longitudinally across its length. Seamless pipe is manufactured by extruding the metal to the desired length; hence ERW pipe has a welded joint in its cross-section, while seamless pipe does not have any joint in its cross-section through-out its length.
An S trap is a length of water plumbing pipe used under sinks. The pipe is shaped like an S and prevents the pipe from becoming air locked. An air locked pipe cannot drain.
Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. Seamless pipe withstands pressure better than other types, and is often more easily available than welded pipe.Welded pipe is formed by rolling plate and welding the seam. The weld flash can be removed from the outside or inside surfaces using a scarfing blade. The weld zone can also be heat treated to make the seam less visible.
The length of pipe is required to be known to help procure the required quantity of pipe.
pipe length = 5487mm pipe size = 6inch
Well the length of the food pipe is about 25-30 cm.
measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
Surface area of the pipe: diameter*pi*length but make sure that the diameter and length are both in meters or inches.
-- Measure the radius of the pipe, in inches. -- Measure the length of the pipe in inches. -- The volume of the pipe is (pi) x (radius)2 x (length) cubic inches
It depends on the length of the pipe.
The volume of this pipe is 28,510,000 mm3
Measure the length of the pipe and the inner Dia of the pipe. 2 x pi x Radius x length is the inner surface area
It depends on what you mean by a 30 pipe. Is 30 the cross sectional area - in which case, what is the length of the pipe? Is 30 the length - in which case, what is the cross-sectional area?
It equals 3/4" in length.
The answer will depend on the length of the pipe.