The bolt that holds the pulley to the drive gear for wash and spin may have come loose and the pulley is free-spinning or the gear has come loose from the shaft. At worst, the gear is broken.
simple pulley simple pulley
a flag pole is a pulley
A fixed pulley is a pulley that is attached to a support. It does not reduce the effort needed to lift the load, but rather changes the direction of the applied force.An example of a fixed pulley would be the rope pulley on a well. This is a fixed pulley because the pulley doesn't move (it is attached to the overhead structure).
well i know 3, fixed pulley, movable pulley and a pulley system (double pulley with fixed and movable pulleys). i guess its basically just the first 2.
Well to start with the question is a bit vague. A pulley has nothing to do with a start operation; a loose pulley may cause the belt not to turn fast enough to charge the battery and that's as far as it goes. Check your belt tension. If loose tighten it. That's All
i have a 1998 Toyota tacoma pickup the pulley is loose on it does it free float or what
its loose tighten the pulley
If you mean the pulley and the shaftit is mounted on, Yes! A loose belt on the pulley doesn't necessarily mean anything but a need to adjust the belt tension.
You will need to loosen the tensioner pulley. When the tensioner pulley is loose the air conditioning compressor belt will become loose. Put the new belt on and tighten the tensioner pulley.
You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.
If it does not drive anything it could be an idler pulley.
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
if i drink slim fast to loose fat will i loose my muscle to
Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.
loose or defective belt, loose or damaged pulley, debris in pulley groove, loose or broken pump mounting bolts, worn pump bearings, low fluid level, incorrect fluid, loose reservoir cap,belt tension too tight,
Fast and Loose - 1954 is rated/received certificates of: USA:Approved