scsi
The BIOS does not contain code to allow a drive to be formatted. To do that you must load an operating system over the BIOS.
-Let the BIOS see the drive as a smaller drive -Upgrade the BIOS -Replace the motherboard -Use software that interfaces between the older Bios and the newer drive -Use an ATA controller card to provide the ATA connector and Firmware to substitute for motherboard BIOS.
# Let BIOS see the drive as a smaller drive, Upgrade the BIOS, Replace the motherboard, Use software that interfaces between the older BIOS and the newer drive, Use an ATA controller card to provide the ATA connector and firmware to substitute for motherboard BIOS
Let the Bios see the drive as a smaller drive Upgrade the bios Replace the motherboard Use software that interfaces between the older bios and the newer drive Use an ATA Controller card to provide the ATA connector and firmware substitute for the motherboard bios
In the floppy drive
hard drive
A computer BIOS initializes and tests the CPU, RAM, chipset, video card, keyboard, hard drive, optical disk drive, floppy drive, and interrupt handlers. Additionally, the bios will check ports on a computer.
You should be able to select the boot order from the bios, check the order in the bios
go into your bios
BIOS is only to detect the drivers. You will see each driver in the BIOS setting. If you have 2 hard drives, you will see 2 drives in BIOS,but if BIOS Only recognize 1,that means 1 drive have a problem. Happen to me many times. Then when finally you are in windows(desktop)then you click on my computer and click on every hard drive then you will see the size of every drive. But not the 1 that was not recognized,because it will not be present.
Make sure the CD drive is the first boot device in the BIOS.
No, the BIOS does.