answersLogoWhite

0


Best Answer

To change the driver's side headlight bulb on a 1998 Acura 3.5RL, open the hood and remove the old bulb. The new bulb cannot be touched by the fingers so use a small plastic pliers that can be found in the store near the bulbs. Put the new bulb in and gently push and turn.

User Avatar

Wiki User

โˆ™ 2014-09-18 00:21:36
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: What is involved in changing the drivers side headlight bulb on a 1998 Acura 3.5 RL?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the problem if your 1994 Acura Integra LS front left headlight is out and changing the bulb didn't work?

check the fuse


Where is the radiator drain plug on a 92 acura integra?

The drain plug is on the drivers side of the radiator. It is almost straight down from the headlight assembly.


How do you replace the headlight bulb located on a 1994 Acura Legend?

replacing headlights on a acura legend 1995


Which fuse is for the Acura RSX headlight?

this web site is useless


How do you change headlight bulbs for a 1997 Acura 2.2 CL?

Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.


How do you change 1999 Acura TL headlight?

To change a headlight on a 1999 Acura TL open the hood and locate the bulbs which are plugged into the housings. Loosen the bulbs and pull them off. Replace them.


How do you adjust the headlights for a 1996 acura 2.5 tl?

There are small adjustment levers next to the headlight housing on the 1996 Acura T.L. Loosing or tighten it to raise or lower the lens of the headlight.


Where is the location of the expansion valve and drier for 94 Acura Integra?

The drier is on the drivers side directly behind the headlight. The expansion valve is located behind the glove box inside of the evaporator case.


How do you change the front drivers side headlight on a 2003 Acura RSX type S?

the front bumper needs to come off in order to take the headlight assemblys out Not true, you can actually replace the drivers side headlight without removing the bumper however its not an easy job. Best thing to do is bring to the dealer which will cost you around 30 bucks to do. Its a pain in the a$$ if you do it yourself though, and is probably not worth your time to do it yourself.


How do you change the headlight assembly on an Acura Integra 2000?

The headlight assembly on a 2000 Acura Integra is held on using bracket bolts. Prop the hood open and locate the headlights. Unbolt the brackets and remove them. Carefully pry the headlight assembly out to not harm the weatherstripping.


How do you replace the headlight located on a Acura Legend?

if its an 88 acura legend then you will need to remove the couple of bolts that hold it down and take it to the local auto store. like other cars you can just replace the bulb but on these acura you need to replace the whole headlight unit


Why does Acura 2003 TL headlight keep on going out?

your ballast or igniter is broken

People also asked