The drier is on the drivers side directly behind the headlight. The expansion valve is located behind the glove box inside of the evaporator case.
Should be the larger hose from the compressor--port maybe by the drier near firewall on passenger side
Between the receiver-drier outlet and the evaporator inlet.
Ensures that only liquid refrigerant continues on to the Thermal Expansion Valve.
Keep it in a drier area. It depends on the seed, but a heated, climate-controlled location is best.
The AC receiver drier on a 1995 Honda Civic is on the high-pressure side of the system. It is between the expansion valve inlet and condenser outlet.
COMPRESSOR, CONDENSER,EVAPORATOR, ORIFICE TUBE, THERMAL EXPANSION VALVE , RECEIVER-DRIER,ACCUMULATOR.
If it's a TXV system, it'll be located between the receiver-drier and the evaporator.
Should be on the receiver/drier.
If you did not replace the expansion block valve and the receiver drier then you will need to do this as well..............
Look on top of the drier probably at the passenger side firewall
Follow the larger hose from the air compressor - maybe be by the drier at the passenger side firewall
The city located further inland can be significantly drier, the city along the coast can have more stable temperatures. Coastal regions tend to be more stable.
form_title= Electric Hand Drier form_header= Dry your hands with an electric hand drier? Is this for a home or business?*= () Home () Business Do you need to replace an old hand drier?*= () Yes () No What is your budget for an electric hand drier?*= _ 
The Namib desert is drier.
moon is drier by a factor of 1000
Antarctica is drier than Australia.
Moosie Drier was born on August 6, 1964.
drier couse when we have vapor air is wet and when we lost it makes air drier.
It is basically a tie. Some claim Antarctica is drier in some locations, others say the Atacama is drier.
New Mexico is drier than Arizona
Edward Drier has written: 'This is Manitoulin and the North Channel'
the drier side is called the rainshadow (leeward side)
You need to recover the refrigerant. Remove the evaporator case and disassemble it. Replace the valve and recharge the system. It is best to install a receiver drier at the same time.