0
A gateway is a node (a router) on a computer network that serves as an access point to another network.
A Default Gateway is the node on the computer network that is chosen when the IP address does not belong to any other entities in the Routing Table. In homes, the gateway is usually the ISP-provided device that connects the user to the internet, such as a DSL or cable modem. In enterprises, however, the gateway is the node that routes the traffic from a workstation to another network segment. The default gateway is commonly used to be the node connecting the internal networks and the outside network (internet). In such a situation, the gateway node could act as a proxy server and a firewall. The gateway is also associated with both a router, which uses headers and forwarding tables to determine where packets are sent, and a switch, which provides the actual path for the packet in and out of the gateway. In other words, it is an entry point and an exit point in a network.
What else can I help you with?
What is the default gateway for 169.254.109.4?
Typically this address would not have a default gateway, since it is an APIPA address, which is not routable.
What is the actual address used for a default gateway?
The address of a default gateway can vary widely depending on which device on which network is the default gateway. There isn't one specific default gateway address.A popular address is one used on home based networks, 192.168.1.1
Your workstations ip address is 10.35.88.12 and another workstation is 10.35.91.4. When sending data from first workstation what is the most likely ip for the default gateway?
10.35.88.12How could the default gateway be the workstations IP address? the default gateway would be the first available IP address in this case 10.35.88.1 it would have to go through your default gateway to get to his default gateway and be sent to his workstation.
What is the default gateway address for 192.133.219.0?
What is the default subnet mask for an IP address of 198.133.219.4?
Is it true that a computer will use a default gateway if the destination IP address is on a deffernt network?
Yes, that is what the default gateway is used for.
When would a PC need a default gateway address?
You would only need a default gateway address if you wanted to route packets outside your local area network.
Why do you setup default gateway server address?
First, you have to know what the default gateway address for your LAN segment is. This might mean talking to your network administrator. Usually this address is set automatically by the DHCP protocol, so you don't need to do anything. If you are using a set of static addresses, then you can specify the default gateway address in one of the Windows network dialog boxes. For Unix/Linux, the 'ifconfig' command allows you to set the default gateway address. For server 2008 (including Server 2008 Core) use the netsh command to set the default gateway address (if not using DHCP).
A PC is connected to a network Which action will verify that the PC can communicate with its default gateway?
Ping the default gateway IP address to know if it is reachable
Which two automatic addressing assignments are supported by DHCP?
subnet mask default gateway address
What is the gateway on my computer?
The default gateway refers to the "next-hop address"; the server or router your computer has to send packets to, to connect with the outside world. If the default gateway is not configured correctly, the usual symptoms are that your computer can connect within the local network, but it can't connect to the outside.You have to obtain the address which you should assign as the default gateway from your network administrator, or from your ISP.The default gateway refers to the "next-hop address"; the server or router your computer has to send packets to, to connect with the outside world. If the default gateway is not configured correctly, the usual symptoms are that your computer can connect within the local network, but it can't connect to the outside.You have to obtain the address which you should assign as the default gateway from your network administrator, or from your ISP.The default gateway refers to the "next-hop address"; the server or router your computer has to send packets to, to connect with the outside world. If the default gateway is not configured correctly, the usual symptoms are that your computer can connect within the local network, but it can't connect to the outside.You have to obtain the address which you should assign as the default gateway from your network administrator, or from your ISP.The default gateway refers to the "next-hop address"; the server or router your computer has to send packets to, to connect with the outside world. If the default gateway is not configured correctly, the usual symptoms are that your computer can connect within the local network, but it can't connect to the outside.You have to obtain the address which you should assign as the default gateway from your network administrator, or from your ISP.
What is default gateway for 10.0.0.30?
The default gateway for the IP address 10.0.0.30 is typically the IP address of the router that connects the local network to other networks, such as the internet. In a subnet with the IP range 10.0.0.0/24, a common default gateway could be 10.0.0.1. However, the exact default gateway can vary based on the specific network configuration. To determine the default gateway for a specific device, you can check its network settings or consult the network administrator.
How do you change gateway address in UNIX?
To change the gateway address in UNIX, you can use the route command. For example, you can set the default gateway with the command route add default gw <new_gateway_ip>. Alternatively, you can use the ip command with ip route add default via <new_gateway_ip>. Make sure to replace <new_gateway_ip> with the actual IP address of the new gateway.
