The address of a default gateway can vary widely depending on which device on which network is the default gateway. There isn't one specific default gateway address.
A popular address is one used on home based networks, 192.168.1.1
Yes, that is what the default gateway is used for.
No, it is not. A destination IP address may be any address, usually on a completely different network. The default gateway address is used to determine where to send packets that need to be routed outside of the current local area network.
When a computer assigns itself an Automatic Private IP Addressing (APIPA) address, it typically does not include a valid default gateway address. APIPA is used when a device fails to obtain an IP address from a DHCP server, allowing it to communicate with other devices on the same local network segment. The assigned IP address falls within the range of 169.254.0.1 to 169.254.255.254, but without a default gateway, the device cannot access external networks, such as the internet.
When forwarding packets to a host on a different subnet, the local host uses the address of the default gateway, which is typically a router within the same subnet. The default gateway serves as an intermediary that routes traffic from the local subnet to other subnets. This address is configured in the network settings of the local host. Packets destined for outside the local subnet are sent to this default gateway for further routing.
When users sign into the internet they may not realize they are using a series of gateways to access their favorite websites. A default gateway is used a lot in office settings where a lot of computers need to be connected to both their internal network and the internet.
A gateway is a node (a router) on a computer network that serves as an access point to another network.A Default Gateway is the node on the computer network that is chosen when the IP address does not belong to any other entities in the Routing Table. In homes, the gateway is usually the ISP-provided device that connects the user to the internet, such as a DSL or cable modem. In enterprises, however, the gateway is the node that routes the traffic from a workstation to another network segment. The default gateway is commonly used to be the node connecting the internal networks and the outside network (Internet). In such a situation, the gateway node could act as a proxy server and a firewall. The gateway is also associated with both a router, which uses headers and forwarding tables to determine where packets are sent, and a switch, which provides the actual path for the packet in and out of the gateway. In other words, it is an entry point and an exit point in a network.
the router interface closest to the computer
The reserved address block for default routing is typically the address 0.0.0.0/0 in IPv4. This block is used to specify that a packet should be forwarded to the default gateway when there is no specific route for the destination address. In IPv6, the equivalent is ::/0. Default routing is essential for directing traffic outside of a local network when no more specific route exists.
Subnet mask is a mask used to determine what subnet an IP address belongs to. Default gateway is the gateway in a network that a computer will use to access another network if a gateway is not specified for use.
Default route
A Default gatewayis a node (a router) on a TCP/IP Network that serves as an access pointto another network. A default gateway is used by a host when the ip'spacket destination address belongs to someplace outside the local subnet.Without a default gateway you will not be able to route packets outof your LAN
A gateway is a node (a router) on a computer network that serves as an access point to another network.A Default Gateway is the node on the computer network that is chosen when the IP address does not belong to any other entities in the Routing Table. In homes, the gateway is usually the ISP-provided device that connects the user to the internet, such as a DSL or cable modem. In enterprises, however, the gateway is the node that routes the traffic from a workstation to another network segment. The default gateway is commonly used to be the node connecting the internal networks and the outside network (Internet). In such a situation, the gateway node could act as a proxy server and a firewall. The gateway is also associated with both a router, which uses headers and forwarding tables to determine where packets are sent, and a switch, which provides the actual path for the packet in and out of the gateway. In other words, it is an entry point and an exit point in a network.