0
What is maximum voltage of a reverse bias diode explain and also defined?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is Meaning of diode rating?
There are two diode ratings. One is the forward current rating, and the other is the reverse breakdown voltage rating. The forward current rating is the maximum current that the diode can conduct before failing, and the reverse breakdown voltage rating is the maximum reverse voltage that can be applied before failing. Of course, the reverse voltage rating has a different meaning in a zener diode, but this answer applies to ordinary diodes.
What is the main difference between diode IN4001 and IN4007?
Both are 1.0 AMP SILICON S general purpose ,Low forward voltage drop. High surge current capabilityRECTIFIER.The only difference is in the maximum repetitive reverse voltage which is 1N4001 has a maximum repetitive reverse voltage of 50 V, 1N4007 is 1000V. Otherwise they are the same. There must be a fault in the circuit which caused the burn-out.
Explain the output wave form a circuit which has a zener diode in reverse biased?
A zener diode has a relatively constant reverse voltage, at the designated zener voltage. If you had a circuit, say, with an AC source, a resistor, and a zener, the waveform across the zener would be the AC source, clipped at the reverse bias zener voltage, and clipped again at the forward bias voltage, typically about 0.7 V.
What does the term PIV for a diode refer to?
Peak Inverse Voltage, the maximum reverse bias (inverse) voltage that can be applied to the diode without damaging or destroying it. The work "peak" is used to remind you that when using the diode to rectify AC (or arbitrary waveforms) you must use the peak voltage, not the RMS voltage.
Maximum generating voltage in world?
maximum generated voltage is 21KV
What do you mean by peak reverse voltage of semiconductor diode?
Peak reverse voltage of a diode is the maximum reverse bias voltage can be applied to diode which does not cause break down.
What is Meaning of diode rating?
There are two diode ratings. One is the forward current rating, and the other is the reverse breakdown voltage rating. The forward current rating is the maximum current that the diode can conduct before failing, and the reverse breakdown voltage rating is the maximum reverse voltage that can be applied before failing. Of course, the reverse voltage rating has a different meaning in a zener diode, but this answer applies to ordinary diodes.
What is Difference between peak inverse voltage and break down voltage?
Two names for practically the same condition. Peak inverse is name whereby the maximum voltage can be sustained. Breakdown is actually the point where a reverse voltage is reached and reverse breakdown has occurred
What is the difference between 1n4004 diode and 1n4007 diode?
The main difference between a 1n4004 and a 1n4007 are in the maximum RMS voltage, the maximum DC blocking voltage and the maximum repetitive peak reverse voltage. These are 280 and 700, 400 and 1000, and 400 and 1000 volts respectively.
What is the importance of peak inverse voltage?
Peak inverse voltage of a device like diode gives the maximum value of voltage that it can withstand without being damaged when it is reverse biased.
What is the significance of piv of diode?
The PIV (Peak Inverse Voltage) rating of a diode is the maximum voltage that you should apply to it in the reverse biased condition. Exceeding this voltage can destroy the diode.
What is avalanche break down in scr?
A: As the reverse voltage is applied to the SCR increases at a certain point the device will start to conduct that is defined as the breakdown voltage for that device
Difference between diode and zener diode?
All diodes have a tiny voltage when current flows in a 'forward' direction. And a Reverse Breakdown voltage when current tries to flow in a reverse direction resulting in a high voltage. That current does not flow until voltage exceeds its breakdown number. Regular diodes have a reverse breakdown voltage that is somewhere above a number, For example a 1N4002 has a Reverse Breakdown Voltage somewhere above 100 volts. A Zener diode is constructed so that its Reverse Breakdown voltage is clearly defined and accurate. For example Reverse Breakdown voltage for a 1N4733 is 5.1 volts. A !N4734 is 5.6 volts.
What is peak inverse voltage with reference to diodes?
The maximum voltage which can apply When diode in reverse bias..if it is exceed that voltage the diode may get damage.
What is the PIV rating of diode?
A diode will provide saturating current if it reaches its Piv. What it should be well at least 1.5 of the applied reverse voltage. For AC at least 2 times to insure that the peak REVERSE voltage is blocked
What is the main difference between diode IN4001 and IN4007?
Both are 1.0 AMP SILICON S general purpose ,Low forward voltage drop. High surge current capabilityRECTIFIER.The only difference is in the maximum repetitive reverse voltage which is 1N4001 has a maximum repetitive reverse voltage of 50 V, 1N4007 is 1000V. Otherwise they are the same. There must be a fault in the circuit which caused the burn-out.
Explain the output wave form a circuit which has a zener diode in reverse biased?
A zener diode has a relatively constant reverse voltage, at the designated zener voltage. If you had a circuit, say, with an AC source, a resistor, and a zener, the waveform across the zener would be the AC source, clipped at the reverse bias zener voltage, and clipped again at the forward bias voltage, typically about 0.7 V.
