The internal gain of an amplifier is the gain or the amplification factor of the transistor used in it....................it is internal because it is fixed for transistors while manufacturing..................
If one amplifier has its own feedback then that will be its gain witch can be added to the next amplifier gain. if both amplifier have a common feedback then that will be to total gain for both.
A: Well for one thing if it is positive feedback the amplifier will saturate to one one side of the power buss or the other. An operational amplifier open loop gain can be 90Db which a tremendous gain so some negative feedback is necessary to reduce the gain and make the amplifier behave in the linear region for amplification
The voltage gain of an amplifier is 200. The decibel voltage gain is? Answer Gain in dB = 20 * log 200 = 46 dB
Usually output of an amplifier is a voltage ,...but in case of Operational Transconductance Amplifier ,Iout (current ) is the output. This feature, makes it useful for Electronic control of amplifier gain .
current gain
A swamped amplifier has a resistance tied to the emitter of the NPN transistor. Swamping the amplifier reduces the voltage gain. When an amplifier is swamped the voltage gain to the output is less dependent on the load. This helps to balance the output and protect the circuit when different loads might be applied.
Darlington amplifier has more gain when compared to cascade amplifier .
The power gain of an amplifier having an input of 20W and an output of 20mW is 0.001. Expressed in decibels, that is a gain of -30db. (log2 0.001 * 3)If you meant an output power of 20MW (mega instead of milli), the gain is 1,000,000, or +60db.
The power gain of an amplifier having an input of 20W and an output of 20mW is 0.001. Expressed in decibels, that is a gain of -30db. (log2 0.001 * 3)If you meant an output power of 20MW (mega instead of milli), the gain is 1,000,000, or +60db.
The Gain provided by the multistage amplifier is greater than the gain of single stage amplifier. The gain of the two stage amplifier is the product of the gain of the individual stages.
The internal gain of an amplifier is the gain or the amplification factor of the transistor used in it....................it is internal because it is fixed for transistors while manufacturing..................
If one amplifier has its own feedback then that will be its gain witch can be added to the next amplifier gain. if both amplifier have a common feedback then that will be to total gain for both.
Since we know that the amplifier gain is given by A=Output voltage/input voltage (where A is the amplifier gain) So, it can be written as output voltage=A*input voltage, so when the output part increases gain increases but when input part increases gain decreases
A: Well for one thing if it is positive feedback the amplifier will saturate to one one side of the power buss or the other. An operational amplifier open loop gain can be 90Db which a tremendous gain so some negative feedback is necessary to reduce the gain and make the amplifier behave in the linear region for amplification
Current gain. At the cost of no voltage gain.
The voltage gain of an amplifier is 200. The decibel voltage gain is? Answer Gain in dB = 20 * log 200 = 46 dB
Every radio has an amplifier. It may be built into the radio or it may be external. You will have to look and see. Most likely it is in the trunk if it is external but not always.