It is the time period in the clock cycle in which the signal on the bus must be the valid expected data. ie. The stable period of the data transmission that will then be loaded into the microprocessor as the actual data.
Latching Current is the minimum current needed on the gate to fire or trigger an SCR.
we know that ratio of holding current to latching current in scr is 0.4.
You can. There are thousands of microprocessors.
CPU are microprocessors.
Microprocessors
Stop hanging on
Just-in-time-delivery is made possible by microprocessors.
A CPU or Central Processing Unit is generally what is meant by the term microprocessor. Sometimes microprocessor can refer to additional hardware, but by and large, CPU = microprocessor.
the power of microprocessors will double every two years
Latching current is the current flowing between anode to Cathode when thyristor is turned on using gate pulse. If the gate pulse is removed before the required min amount of latching current value is not reached thyristor will turn off. To keep the thyristor in on state the gate pulse duration should be so adjusted that the min latching current value is reached before it ends.
my gaff :)
The program used inside microprocessors is microcode,the program what microprocessors execute is machine code.