0
Tube pitch is the center-to-center distance between parallel straight tubes in a uniform bundle. The tube layout pattern is usually triangular or square. The tube pitch is usually about 1.25 times the outer diameter of the tubes.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the sole purpose of a heat exchanger?
The purpose of a heat exchanger is that it transfers heat from a liquid to another fluid on the opposite side of a barrier. There are two kinds of heat exchangers parallel-flow and counter-flow.
Heat exchangers can be found in what systems?
furnance Applications of finned tube heat exchangers embody Steam air heater / steam radiator, energy fluid air heater / energy fluid radiator, predicament air heater / predicament radiator, Air heater for spray dryers, Air heater for fluid bed dryer, Air heater for flash dryers and Air heater for dryers. These area unit factory-made exploitation high grade steel, stainless-steel, copper, brass and metal. Our Finned Tube Heat exchangers area unit designed to satisfy the particular temperature, heavy duty condition and pressure of the fluids. Fin tubes,tubos aletados, acero inoxidable, Stainless Steel 304, Aluminum,Finned tube,Brass tube, Valve & Pipe Fitting Supplier at http://www.ts-aceroinoxidable.com
What are the advantages and disadvantages of spiraltube heat exchangers?
Advantages of shell and tube heat exchanger are: * Its compact design * Capability of withstanding high pressure Disadvantages: * It is difficult to readily inspect the shell side of the tubes for scaling or tube damage
What is the difference between double pipe heat exchanger and shell and tube heat exchanger?
double pipe heat exchanger is made if two concentric tubes one carrying cold flow and the other one carrying hot flow. but shell and tube hear exchangers are made of a shell like a vessel filled with many thin tubes to transfer heat between fluids. there are more data available at : http://scopewe.com/double-pipe-heat-exchanger-design-part-1/
How are steam condensers classified?
Two broad types of condensers are: (i) Direct contact type condensers; where the condensate and cooling water directly mix and come out as a single stream. (ii) surface condensers; which are shell and tube type heat exchangers where the two fluids do not come in direct contact and heat released by the condensation of steam is transferred through the walls of the tubes in to the cooling water continuously circulating inside them
What is the different between plate heat exchangers and tube heat exchangers?
One uses tubes, the other uses hollow, flat conduits.
Name the types of heat exchangers used as super-heaters?
Water tube heat exchanger swimming pool, Coaxial heat exchanger for laser and stainless steel exchangers are some of the heat exchangers used as super-heaters.
Is it required to do pickling and passivation on Tube to tube sheet welding on Stainless Steel Heat exchangers?
yes
What is the use of shell and tube heat exchangers?
shell and tube heat exchangers are used mostly in the chemical processing industry for heating, cooling, condensing, and evaporating highly corrosive liquids and gases. AMETEK Fluoropolymer Product shell and tube heat exchanger was the first heat exchanger developed using fluoropolymer tubes and the patented honeycomb tube to tube sheet joint which has been successfully used for over 55 years. Sulfuric Acid is the chemical most used with Ametek Fpp heat exchangers. The process of making sulfuric acid can vary, but any company dealing with the manufacturing process has a high potential for the use of a fluoropolymer heat exchanger in their process. Other Acids commonly requiring fluoropolymer heat exchangers are Hydrochloric, Nitric and Hydrofluoric Acids. Another chemical manufacturing industry fluoropolymer heat exchangers are used in is the Chlor-Alkali manufacturing process.
What has the author J M Chenoweth written?
J. M. Chenoweth has written: 'Flow-induced tube vibrations in shell-and-tube heat exchangers'
What has the author William B Igoe written?
William B Igoe has written: 'Reynolds number effects on pressure loss and turbulence characteristics of four tube-bundle heat exchangers' -- subject(s): Aerodynamics, Heat exchangers, Vibration
What is breech lock main features of this type exchangers?
The main features of the breech lock of exchangers include plugs, shell and tube heat exchangers and so much more. The features make it effective in sealing high pressures from fluid flows.
What are the different types of heat exchangers available today?
There are three main types of heat exchangers on the market today. Type 1, Brazed Heat Exchangers, are a collection of plates, vacuum brazed together with no gaskets. They have a high turbulent flow, which reduces particle build up and the need for maintenance. They are good for water based systems such as radient floor heating and swimming pools. Type 2, Shell and Tube Heat Exchangers, are copper U-tubes in a carbon shell. They are rugged, and are frequently used when the materials being cooled are corrosive. Type 3, Shell and Coil Heat Exchangers, are made of circular layers of corrugated tubing and are installed vertically. They are very efficient and are appropriate where space is at a premium. There are many different types of heat exchangers. The types of heat exchangers are: shell and tube, plate, regenerative, adiabatic wheel, plate fin, fluid, waste, dynamic scraped surface and phase-change.
Why do they not make heat exchangers out of stainless steel to help deter corrosion and tube breakthrough?
Stainless Steel Heat Exchangers are produced and distributed by Triangle Tube Products . Although stainless steel is highly resistant to corrosion, it is also more expensive and has a lower coefficient of heat (transfers less heat) than other metals. So, like most things in life, it's a trade-off between co$t, performance, and longevity. Hope this helps ... If resistence to corrosion is the main priority, Titanium is used.
What has the author A G Gomaa written?
A. G. Gomaa has written: 'Thermo-fluid characteristics of fin-and-tube heat exchangers with various fin details for air conditioning applications'
What is the sole purpose of a heat exchanger?
The purpose of a heat exchanger is that it transfers heat from a liquid to another fluid on the opposite side of a barrier. There are two kinds of heat exchangers parallel-flow and counter-flow.
How many types of heat exchangers are there?
Heat exchangers are devices that allow heat to be transferred between two or more fluids of different temperatures (vapors, liquids, or gases). The heat transfer process can be liquid-to-gas, gas-to-gas, or liquid-to-liquid, and it can happen through a solid separator or direct fluid contact, depending on the type of heat exchanger used. Other design features, such as construction materials and components, heat transfer processes, and flow configurations, aid in classifying and categorizing the various types of heat exchangers accessible. Heat exchanger makers offer a wide range of heat exchanging devices designed and manufactured for use in both cooling and heating processes and find applications across a wide range of industries. This blog examines the numerous types and designs of heat exchangers, as well as their functions and mechanics. This blog also discusses the factors to consider when choosing a heat exchanger and the most popular applications for each one.
