0
What is my 1998 Mitsubishi montero sport LS with v6 engine spark plug wire order or which spark plug chamber goes to which terminals for firing order.?
the firing order is 123456
1,3,5 on left side of engine from the front of the vehicle 2,4,6 on the right side of the vehicle
googel
(what is the firing order for a Mitsubishi montero)
What else can I help you with?
Does a Mitsubishi Montero 02 have a interference engine?
Yes
What engine will bolt into a 88 Montero?
2.6 Liter Mitsubishi Engine
Where is the number one cylinder on a 95 Mitsubishi Montero?
The number one cylinder on a 95 Mitsubishi Montero is in the front of the engine. It is on the left side as you face it.
Where is the thermostat located on a 1995 Mitsubishi Montero?
The thermostat on a 1995 Mitsubishi Montero can be found by following the radiator hose. It is near where the hose enters the engine.
What size engine is in the 1987 Mitsubishi montero?
2.6l 4 cylinder
Is 98 Mitsubishi montero sport 3.0 an interference engine?
Yes, it is.
Where is the PCV valve on a 1997 Mitsubishi Montero?
You can find the PCV valve for your 1997 Mitsubishi Montero on top of the engine. The PCV valve will be in front of the air cleaner housing.
Is a 1990 Montero interferrance engine?
The 1990 Mitsubishi Montero 3.0 V6 is listed as a non-interference engine. Replace the belt every 60,000 miles.
What are the firing orders for Mitsubishi montero sport 3.5 xs?
Knowing the engine firing order can help diagnose problems with the engine. The engine to the Mitsubishi Montero Sport 3.5xs has a firing order of 1-2-3-4-5-6.
Where can i see a picture of a 1990 Mitsubishi montero engine?
go to the makers web site or google
Where is the fuel injectors located on a 2001 Mitsubishi montero sport?
The fuel injectors on a 2001 Mitsubishi Montero Sport are located on the top, back side of the engine. They connect directly to the cylinder and provide fuel for combustion.
How do you check obd1 codes on a 1992 Mitsubishi montero?
To check OBD1 codes on a 1992 Mitsubishi Montero, locate the diagnostic connector under the driver's side dashboard. Use a jumper wire to connect terminals 1 and 4 of the connector. Turn the ignition key to the "On" position (but do not start the engine), and the check engine light will blink out the trouble codes in a pattern. Count the blinks to decipher the codes, which can be referenced in the vehicle's service manual for further diagnosis.
