Want this question answered?
We find carbon or graphite as the center electrode of a zinc-carbon battery. It's the "common" battery we use in lots of stuff (but not an alkaline battery). That center electrode is the positive one, and the zinc makes up the outer or negative electrode in this battery. In an alkaline battery, manganese dioxide is the center, or the cathode (positive electrode). Powdered zinc will be found as the outer or negative electrode (anode).
Zinc
The negative battery lead cable is to be connected to the negative lead terminal on the battery.
The negative electrode of a dry cell battery was made of zinc.
In Chemistry an anodic is an electroplating cell in an electrode in which it gets a negative charge as in a negative charge from a chemical reaction in a battery.
The electrode with the + mark, red wire. Black is negative.
Lithium ion batteries use lithium metallic oxide in its positive electrode (cathode) and carbon material in its negative electrode (anode). Lithium ions inside the battery transfer between the positive electrode and the negative electrode during charge or discharge. Ms.Helen Ren
Note: When interconnecting A200 batteries (cells), they must be identical in voltage and amp rating! Batteries may be connected in series. The positive terminal of the first battery is connected to the negative terminal of the second battery; the positive terminal of the second is connected to the negative of the third, and so on. The voltage of the assembled battery is the sum of the individual batteries. The batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged. Batteries may also be connected in parallel. The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third; the negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third and so on. The batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the individual batteries and voltage is unchanged.
If we are talking about electrolysis then,"NaCl solution is used as electrolytic solution.a battery is needed to connect copper wires and metal pieces are used as electrode,one wire is connected to one side of battery and is attached to one electrode while other at opposite side with another electrode.the electrode connected to the positive terminal of battery is called anode and electrode connected to the negative terminal is called cathode.when the electric current is passed in the electrolytic solution of NaCl,the NaCl breaks into Na positive ion and Cl negative ion.Na positive ions will deposit on cathode and Cl negative ions will deposit on anode.when Na is scarped,it is used in medicines for heart patient while Cl is used as chlorine water(antiseptics) such as detol".Thus,chemical bond of NaCl is broken down.
Anode is positive electrode which attracts the negative anions while cathode is the negative electrode which attracts the positive cations during electrolysis.
a) conducting solution b) negative battery terminal c) positive battery terminal d) object to be plated e) electrical connecting wire
The battery cable that is grounded, is connected to the body of the vehicle. Sometimes it is the negative cable & sometimes it is the positive. You need to check which cable is connected to the body of the vehicle.