The piston is what is what is pushed down to create power to the engine . the fuel comes in thru the fuel injectors or carburretor, then is pulled into the combustion chamber, the spark plug ignites the fuel/air mixture causing an explosion inside the cylinder, pushing the piston down making power. go to autozone.com look up piston and you can see a picture.
There are also 'pistons ' in every brake cylinder, one at each wheel of the car. The brake fluid exerts pressure on these pistons to push against pads or shoes in order to stop the car.
for racing cars titanium piston use.
28 belongs to two Cars, the Nitroade Piston Cup car Apple computers Piston Cup race car.
piston cup
worn piston rings or barrels
If on the rear you might have to turn the piston clockwise. If on the front you must force the piston in.
Almost all piston engines have a thermostat somewhere.
it means your into working on cars, truck, or bikes. anything with an engine
well there is a crank shaft which the piston connects to and is the thing that spins out the engine, there is also cranks on old cars to start them on the front
Cars use chemical energy in the form of thermal energy which is used to drive a piston crankshaft arrangement
It will usually say the piston number on the intake manifold on most cars.
no it is not it just got made for cars 1 and 2
Use a "C" clamp to collapse the caliper piston. Use one of the old pads across the face of the piston. If you use the clamp on the bottom of the piston it is possible to crack the piston. Using the old pad spreads the pressure to both sides of the piston. That is if the piston is a cup. If it is solid on the face then it screws in, but I believe this type is only used on the rear brakes of cars.