0
PPM = Parts Per Million
A measurement of the concentration, or mixing ratio of one substance in another.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What does ppm stand for when putting chemicals in a swimming pool?
Parts per million
What is Acceptable total dissolve solid ppm in swimming pool?
less than 1000ppm
How do you decrease chlorine ppm in swimming pools?
Drain some of your pool and refill it with fresh water.
What should the Chlorine parts per millon be for a swimming pool?
The recommended chlorine level for disinfecting private pools can be as high as 2.0 PPM. 2 ppm is now the minimum. Recommended levels are now 1.5 ppm to 5.0 ppm.
How much chlorine is used in a swimming pool?
Chlorine level should stay between 1.0 and 3.0 parts per million (ppm) to maintain a healthy pool.
What is the Minimum and maximum level of cynuric acid in the swimming pool water?
.03g/L or 30 ppm or 1 lb for 3800 gallons (14400 liters)
How much chlorine should you put in an 18-foot swimming pool?
Enough to bring the readings to within 1.5 to 5.0 ppm. Ues a test kit!!
how many pounds of salt do you add to a 12000 gallon swimming pool?
salt is based on PPM or parts per million and a salt system operates around 3000 PPM on most systems. If you have no salt in your pool the amount of salt to add would be around 200 pounds but if you have some salt in the system then you need to find the ppm already in the pool and adjust as needed. Do not forget to add cyneric acid or you will lose what sanitizer is produced on the hot days.
How do you check the ppm of salt in a salt system pool?
You can buy salt test strips and electronic salt testers at any good pool supply store - Leslie's carries them.
What is swimming pool in English?
'Swimming Pool', sometimes shortened to 'Pool'.
What should the readings be for alkalinity and stabilizer for a salt water swimming pool?
The same as a non-salt system pool. Disregard answer above. The only reading that will remain constant, in the above situation, is the alkalinity =80 - 120 ppm; pH = 7.4 - 7.6 For a salt system pool your conditioner/stabilizer should be slightly higher than a namually fed pool. You should achieve readings of 75 - 85 ppm.
How much acid and chlorine should be added to a 5000 liter swimming pool?
How much acid and chlorine should be added to a 5000 liter to make 5 ppm solution
