There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
3.73
yes, but not if 4wd
I had a 1991 Ford Mustang 5.0 L - LX - automatic , and it had 2.73 's
more than likely it's a 3.08 gear in the rearend.
80 or 85W90 gear oil.
Jeep Wrangler only,
Do you mean gear ratio or rearend size?
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
Open your drivers door and look at the information stickers , look for the axle code If you resubmit your question with the year of your F-150 and the axle code I'll try to look up the gear ratio - Helpfull
Open the cover, count the teeth on the big gear ( the ring gear ) next count the teeth on the small gear ( the pinion gear). Divide the big gear by the little gear and that is your ratio.
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
Yes, whether you are replacing the whole rear-end or just the center diff they are interchangable. Just be sure the gear ratio is the same if it is a 4wd, if it is a 2wd can be any gear ratio. Higher for better gas milage such as 330 or 355, lower 373 or 410 for pulling power hope this helps.