0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is saturation and decline stage?
saturation and decline of the supermarket
What is the approximate percent saturation of hemoglobin by oxygen in normal arterial blood?
The saturation should be above 90% in normal arterial blood. A totally healthy person will have 95-100% saturation.
Where is the water table located 1 at the top of the zone saturation 2 under the zone of saturation 3 in the layer of bedrock 4 below the layer of bedrock?
a. at the top of the zone of saturation
What is the percentage of saturation?
i have no ideaidk
Reverse saturation current of Ge diode?
Reverse saturation current of germanium diodeThe current that exists under reverse bias conditions is called the reverse saturation current. Reverse saturation current of the germanium diode is typically 1 micro ampere or 10-6 a.At a fixed temperature, the reverse saturation current of a diode increases with increase in applied reverse bias. In reverse bias region the reverse saturation current also varies with the temperature.
What is end-point scaling in reservoir simulation?
Oil-WaterSWL = 0.2 SWCR = 0.22 SOWCR = 0.2 KRO = 0.9 KRW = 1 SORW = 0.2 KRORW = 0.8Saturation table end-point scaling (SWCR, SGCR, SOWCR, SOGCR, SWL)SWCR - critical water saturation (that is the largest water saturation for which the water relative permeability is zero)SOWCR - critical oil-in-water saturation (that is the largest oil saturation for which the oil relative permeability is zero in an oil-water system)SWL - connate water saturation (that is the smallest water saturation in a water saturation function table)Relative permeability end-point scaling (KRW, KRG, KRO, KRWR, KRGR, KRORG, KRORW)KRW - relative permeability of water at maximum water saturation parameterKRO - relative permeability of oil at maximum oil saturation parameterKRWR - relative permeability of water at residual oil saturation (or residual gas saturation in a gas-water run) parameterKRORW - relative permeability of oil at critical water saturation parameter
What is residual oil saturation?
Residual oil saturation is oil saturation that can not be produced from an oil reservoir from gas or water displacement. It is usually considered the immobile oil saturation after conventional (gas or water displacement). 1) It is can be based on result from a laboratory test. A core sample (rock sample in the shape of a cylinder) is taken from a reservoir is first saturated with oil and then displaced (pushed out) with water or gas. The test is ended when no more oil can be produced from this core. The oil that can not be pushed out and remains in the core is termed "residual oil." The residual oil to gas displacement may be different from the residual oil from water displacement. The residual oil in this case is a laboratory estimate. 2) It can be based measurement made in a well. If a zone in a reservoir is producing only gas or water, it may be assumed that the oil has been completely displaced. In this case, special tools are lowered in the well and the oil saturation is determined. The residual oil in this case is a field estimate. There are a number of unconventional means (or enhanced recovery techniques) to displace the residual oil. A common means is injection of carbon dioxide or an enriched gas at high pressures which can partially dissolve the residual oil.
When hydrogen atoms are added to an unsaturated oil to cause more complete saturation it produces what?
Trans Fats
Can plastic oil bottles get recycled?
Yes, it is possible, also with the recovering of the remaining oil.
What is residual oil?
Residual oil saturation is oil saturation that can not be produced from an oil reservoir from gas or water displacement. It is usually considered the immobile oil saturation after conventional (gas or water displacement). 1) It is can be based on result from a laboratory test. A core sample (rock sample in the shape of a cylinder) is taken from a reservoir is first saturated with oil and then displaced (pushed out) with water or gas. The test is ended when no more oil can be produced from this core. The oil that can not be pushed out and remains in the core is termed "residual oil." The residual oil to gas displacement may be different from the residual oil from water displacement. The residual oil in this case is a laboratory estimate. 2) It can be based measurement made in a well. If a zone in a reservoir is producing only gas or water, it may be assumed that the oil has been completely displaced. In this case, special tools are lowered in the well and the oil saturation is determined. The residual oil in this case is a field estimate. There are a number of unconventional means (or enhanced recovery techniques) to displace the residual oil. A common means is injection of carbon dioxide or an enriched gas at high pressures which can partially dissolve the residual oil.
What are the main causes for ignition wire failure?
Age Extreme heat Oil saturation from leaking valve cover gasket
What is saturation and decline stage?
saturation and decline of the supermarket
How do you reset the change oil soon light on a aurora?
On the display panel Click the Engine button until it shows oil life remaining, then press and hold the Reset button a few seconds till it switches to 100% oil life remaining. The light will then extintuish
What is 36 percent oil life remaining in Ford Explorer 2004?
what is the answer to the question?
What causes saturation in a welding transformer?
what causes saturation in welding machine
What they used saturation carpet bombing?
who used saturation carpet bombing
What is saturation in magnetic materials?
saturation occurs when a magnetic material is as magnetized as it can get.
