The Mohs hardness of sodium chloride is 2,5.
The Mohs hardness is established by comparison with other minerals, having a known hardness.
The Mohs hardness of sodium chloride is 2,5.
The Mohs hardness of sodium chloride is 2,5.
The function of calcium salts is to provide hardness and strength and resist compression.
calcium and magnesium
Yes. it causes temporary hardness of water, which can be generally removed by boiling water.
The hardness of bone is due to the calcium salts deposited in it.The exceptional hardness of bone, which allows it to resist compression, is attributed to the presence of inorganic hydroxyapatites. Hydroxyapatites such as calcium phosphates are particularly important for bone hardness. Organic substances such as collagen fibers contribute to tensile strength, but not to hardness.the presence of inorganic hydroxyapatites.
Bone salts (calcium, mainly) lend hardness; the protein-rich organic matrix permits some flexibility
Bone salts (calcium, mainly) lend hardness; the protein-rich organic matrix permits some flexibility
Because they are salts and thus are neutral. Also- water is also neutral.Improve:The above answer is not correct. Neutrality is not the issue. The reason is that sodium and potassium salts are readily soluble and will not precipitate out under normal conditions and so do not cause scale to build up in pipes and boilers. They also do not react with soap to form a scum and inhibit lathering.The sulphate, carbonate and chloride salts of calcium and magnesium are responsible for the hardness of water. They cause something called 'permanent hardness' which is manifested by the interference with soap lathering and the formation of scum. This is due to the presence of the calcium and magnesium ions in the water which causes the precipitation of insoluble stearates from the soap. Sodium and potassium ions do not cause this effect.The other type of hardness called 'temporary hardness' is mainly due to carbonate and bicarbonate salts of calcium and magnesium. Calcium and magnesium carbonate are less soluble in hot water than cold and will precipitate out in hot water pipes and boilers forming limescale. This is because the carbonate salts in tap water are in equilibrium with bicarbonate salts and the heating drives off carbon dioxide and breaks down the bicarbonate to the much less soluble carbonate.
Because ALL sodium salts are soluble: carbonates and hydroxide and natural soap: "fatty acid carboxylates", contrarely to Ca- and Mg salts
We often talk about water of different qualities in our daily life and very often we are faced with certain problems caused by hard water. The total hardness (TH) consists of all calcium (Ca) and magnesium (Mg) salts dissolved in it. Water hardness consists of two types of hardness, carbonate, and non-carbonate. Carbonate hardness consists of calcium and magnesium bicarbonates Ca(HCO3)2 and Mg(HCO3)2. Non-carbonate hardness consists of all their other salts such as chlorides, nitrates, sulfates, etc. After washing in hard water, stains from precipitated limescale remain which are very difficult to remove, textiles washed in βhardβ water become stiff due to the deposition of limescale on fine textile fibers, and washing in hard water consumes more detergents due to the reaction of detergents with hardness salts and, creation of insoluble soaps β soap scum. Using soft water can solve all these problems.
what is the difference between Shore-A Hardness & Barcol Hardness
no one likes your Hardness! hardness is not a good character.