Echo brand
Attaching a leaf spring to a chassis
A set of leaf spring that is so mounted that it is at right angles to the length of the Vehicle is known as the transverse leaf spring.
the eye of a leaf spring, assuming u mean the eye at end of spring, is used to bolt the spring to the vehicle
optimized dimensions of a mono leaf composite spring
mono leaf
the leaf spring on a vehicle's axle is an example
leaf spring front pivot bolt 115 ft/lbs leaf spring rear upper shackle bolt 115 ft/lbs leaf spring lower shackle bolt 80 ft/lbs
No. A coil spring has coils, no leafs. A leaf spring has leafs, anywhere from one leaf to many leafs depending on the application.
A leaf spring may be classed as "bad" under the following conditions: Ride height is noticeably reduced; spring leafs are cracked or broken; spring eye bushings, pins or shackles are worn. Most leaf springs can be rebuilt at your local spring shop.
The amount of curvature given to the leaf and observed from the main leaf upto the point just below the centre of the either of the end eyes of the spring.
Coil springs are spiral. Leaf springs are flat blades of steel stacked on top of each other. Air springs are bags of air. Leaf springs are cheaper and carry more weight (hence often rear springs are leaf). Coil springs are wound tighter at the bottom so that their spring constant is greater (this is to make a linear force after compensating for gravity).