3/8 inch thread and 1 1/4 inch long
start with center bolts and work your way out in a circular patternaltenating from side to side
Possible difference in bolt patterns between heads and manifold. There were two different patterns used, switching from early to late around 1976 or 1977.
yes
The temperature sending unit on a 1977 302 engine is on the front. It is located in front of and to the right of the intake manifold.
you have to drop exhaust be able to remove starter.
Easy 4 to 6 bolts.
45, for an iron intake, 35 for aluminum.
unleaded premium
No, Episode 4 was filmed 1976-1977. Episode 3 was filmed 2004-2005.
from the top of gear case housing at mounting bolts hole measure the shift rod at 21.5 inches to center of hole in shift rod,in neutral gear.
check the catalytic converter. if the engine isisnt running hotter than normal it is most likely plugged exhaust somewhere likely in the catalytic converter
It's usually screwed into the intake manifold towards the front, near the thermostat housing.