0
What else can I help you with?
Where is the fuel pump relay located in a 1988 Honda prelude?
where is the fuel pump cutoff relay located in a honda 88 prelude?
What is the fuel pump pressure on a 1997 Honda Civic LX?
honda civiv 1997 fule pump pressure
What does the fuel pressure run on a 1988 Chevy Celebrity?
The fuel pressure should be 45 psi.
Best fuel ratio for CR 500 Honda 1988?
17.
Where is the pressure release valve on a 1989 Honda Dx 15 engine?
fuel pressure?? if it is fuel injected it should be on the end of the fuel rail.
Where is the fuel pressure regulator on a 1989 Honda Accord?
The fuel pressure regulator is located on the fuel rail of the engine. The regulator is placed at end of the fuel rail.
Where is the fuel pressure regulater on a 96 Honda Accord?
It is located at the end of the fuel rail.
Where is the oxygen sensor located on a 1988 Honda prelude fuel injected?
The oxygen sensor on a 1988 Honda Prelude fuel injected engine is on the exhaust manifold. It screws directly onto the front of the exhaust manifold.
Where is the fuel pump on a 1988 Honda Accord LXI?
No it's not. That is the fuel filter. The fuel pump is in the fuel tank. you can access it through a cover plate just behind the back seat. No need to remove the fuel tank. For an 1988 Honda Accord LXI the fuel pump is in the back right of your intake manafold.
What is the fuel capacity of a 1988 Honda Civic?
11.9 gallons maximum capacity.
What is the fuel pressure of a 2002 Honda Odyssey?
The fuel pressure for a 2002 Honda Odyssey typically ranges from 40 to 50 psi (pounds per square inch) when the engine is running. This pressure is essential for proper fuel delivery to the engine. If the fuel pressure is outside this range, it could indicate issues with the fuel pump, fuel filter, or fuel pressure regulator. Always refer to a service manual or consult a professional for accurate diagnostics.
Where to check fuel pressure on a 1993 Honda Accord?
You can check fuel pressure by buying a fuel pressure master kit and remove the fuel line from the fuel rail with a size 17 socket and then install tool and crank.
