Want this question answered?
Under 400 GPM at best (without friction)
First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
That would depend on the pressure huh?
Nothing as long as the pressure pipe is not used for potable water as you cannot make a direct connection and depending on the GPM flow what size the larger sewer pipe is as 1 GPM (pumping) is considered 1 fixture unit when sizing the drainage system ALSO make sure the pumps system enters at a right angle 45 deg so your not eroding the side of the larger pipe out
gallon per minute (gpm).
100
Yes, easily.
80 gpm
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
It would 2.75 feet with a 10 inch pipe. It would be 2.75 feet with a volatility of 722 GPM.
you need to know the viscosity of the liquid - molasses or alcohol?
To find the maximum flow you would need to know the maximum pressure. A typical fire nozzle pressure would be up to 100 psi with a diameter of 1 to 1.25 inches. The GPM would be between 300 GPM and 460 GPM through the nozzle. If it were simply a 3-inch pipe with an oversized pump, running at 100 psi with no nozzle, you could (in theory) move over 3,000 GPM through the pipe (ignoring friction loss). Even at 80 psi, a master stream through a 2-inch nozzle moves over 1,000 GPM.
Under 400 GPM at best (without friction)
-39
First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
7.359
500 gpm