the spark plug gap setting should be located under the hood in the engine compartment right besides the type of refrigerant if not check with your locale auto store they would have that information for you
.050 inch.
.20-.24
.24 to .31
manual calls for .20-.24
30:1 with a tcw-3 2 storke oil or 24:1 with sae30 the spark plug gap is.030 in with a b8s ngk spark plug 30:1 with a tcw-3 2 storke oil or 24:1 with sae30 the spark plug gap is.030 in with a b8s ngk spark plug The mix for your motor is 24:1 and the gap is 30 but i use a gap of 35 on these motors. they run better for trolling also i use a hotter plug they call for a J4 but i use the J6 a little hotter running plug stays cleaner longer. I own two of the same motor, good luck with yours.
.030 (0.76 mm) gap. Use a Tecumseh resistor plug.
The L76V is a surface gap plug. There is no measurable gap.
The spark plug gap is 09.96 The spark plug gap is 09.96
.035 is the plug gap.
Plug gap is .040"
.045 spark plug gap
spark plug gap for a 2.2l is 0.060"