.028 in.
NGK
The spark plug gap for a 1993 Honda CBR600F2 motorcycle should be set at .036 inches. An auto parts store should carry a spark plug to fit this motorcycle.
.035
The 1979 Honda motorcycle spark plug gap is .013. Most spark plugs will come pre-gapped from the spark plug manufacturer.
what is the gap for a 2006 honda vtx 1300 using a honda plug or a autolite ?
Depends on what we are talking about. There is the Honda Recon 250 ATV with a single cylindar engine, the spark plug is located at the cylinder head. The Honda Hornet motorcycle is a 4 cylindar bike with the spark plugs at the side of the cylinder heads. Then there is the single cylindar Honda Nighthawk 250 one cylindar motorcycle with the spark plug located at the side of the cylinder hear. The spark plug is easily located on any vehicle as it is visible by a thick wire and a (usually) rubber spark plug cap.
0,8-0,9 mm
.031 or 31mm
The recommended gap for a 2000 Honda XR250R motorcycle is .035" Additional info. FYI: NGK shows part # CR9EH-9 (or CR9EHIX-9 for the iridium version) as the correct spark plug for this application.
The correct spark plug for this motorcycle is: NGK D8EA
The Honda FES 125 Pantheon is a motor scooter, developed by Honda.If you want to find a spark plug for one you should go to a motorcycle parts store and see if the plug cap for that model is available.
OEM are the best spark plug wires for the Honda cbr. These spark plug wires can be found at the local Honda dealership.