Hi the correct torque is 10-12ft pounds as it is an aluminum and any greater torque will cause the bolts to stip out , beware mitchell on demand has two torque sequences and it is a misprint. I learned the hard way from the Machine shop $$$.
2.7L doesn't have cam bearings. It has Cam towers. There is no Bearing in there. Look for torque of Camshaft Towers.
Bearing caps.
100 in lbs.
1300 citi golf cam shaft torque settings
SOHC--Single OverHead Cam DOHC -- Dual OverHead Cam
Hi, Simply align the hole (in the camshaft sprocket) with the groove on the #1 cam bearing. The hole will be approx. at 12 o'clock.
What specs do you need? Torque for the gears or caps? Dimensions? TDC timing marks?
standard overhead cam (engine)
SOHC: Single overhead cam DOHC: duel overhead cam it just means if you car is a single can, or twin cam, the SL1 modles are single cam, and the SL2 are duel cam
The cam timing on a 4.6 SOHC engine is set by aligning the timing marks of the timing chain to the cam sprocket. This sets the initial timing based on factory settings.
DOHC - Dual Overhead Cam. This means that there is an intake and an exhaust cam, allowing the valves to move differently for the intake and exhaust. SOHC uses a single cam with more lobes
3.2 liter Single overhead cam (SOHC)Torque: 233 ft-lbs. @ 3000 rpmHorsepower: 215 hp @ 5600 rpmValves: 18