answersLogoWhite
Timing and Firing Orders
Hyundai Accent
Nissan Frontier
Timing Belts and Chains

Where should the cam position be when setting timing marks on a 1998 Hyundai Accent 1.5L sohc?

343536

Top Answer
User Avatar
Wiki User
2005-08-08 01:37:04
2005-08-08 01:37:04

Hi, Simply align the hole (in the camshaft sprocket) with the groove on the #1 cam bearing. The hole will be approx. at 12 o'clock.

1

Related Questions

User Avatar

Hyundai states the 2001 hyundai accent vehicle manual of timing belt replacement timing belt on an accent should be changed every 60, 000 miles.

User Avatar

Hyundai dealer or service station should stock this

User Avatar

The 2002 Accent booklet states that the Timing Belt should be changed at 60,000 Miles.

User Avatar

They are absolutly the same, you should have no problem at alla making the swap.

User Avatar

It is not recommended that you replace the wheel bearings on your Hyundai Accent by yourself. Rather you should take the vehicle to a repair shop or to the dealer where you bought the vehicle for servicing.

User Avatar

No you should not do it. Always replace it before moving the vehicle

User Avatar

You don't. This should only be done by an expert.

User Avatar

You should pull the codes and then clear them with a scan tool.

User Avatar

iT SHOULD BE ON AN AUTOMATIC TENSINOR DEVICE . NO ADJUSTMENT NEEDED.

User Avatar

Should be two, one in front and one in back.

User Avatar

The air conditioning system capacity of the Hyundai Accent is dependent on the year model. All Accents from 1995 to 2001 has a capacity of 24 ounces. The capacity beginning is 2002 is 20 ounces.

User Avatar

According to the Gates website ( they make timing belts etcetera ) For the 1.6 litre four cylinder engine in a 2005 Hyundai Accent ( the timing belt is changed at 60,000 miles )

User Avatar

I have 2000 accent, my fuse box is to the left of your feet as you sit in the drivers seat, on the side panel. There should be a small door. Hope this helps you out.

User Avatar

To changeÊthe ignition switch on a Hyundai Accent, first, one should remove the switch from the steering column, to which it is attached. From there, the component can be replaced.

User Avatar

In the tank, there is no serviceable fuel filter. It should last the life of the car. Hyundai did away with most serviceable fuel filters around 2002.

User Avatar

It depends on the specific year and engine size of the car (1.5 or 1.6 ... SOHC or DOHC), and price will vary based on brand and which store you call. A general estimate for a new water pump for a Hyundai Accent should be anywhere from $40-60.

User Avatar

The 1999 Hyundai Accent GL recommended transmission oil is API GL 5, SAE 75W90 semi synthetic transmission fluid. The transmission fluid can be purchased at any auto parts store.

User Avatar

The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs

User Avatar

Getting your tires balanced should help stop your shutter and shake.

User Avatar

should just unbolt dude. just like any other car

User Avatar

Because you should have bought a Chevy and not some P.O.S. slant eyed Hyundai.

User Avatar

Call Ken at Sandon Breakers. He can crush your nasty little Hyundai for you. That should sort your brake light issues

User Avatar

well if it is still in the vehicle look on the bottom side of the hood on the car it should be somewhere on there it should say emission information it will tell you how many CI's the car is and How many litres the engine is or you can get the VIN number of the dash on the drivers side and call your local Hyundai dealership and ask to speek to the parts deparment explain your situation to them and they should be able to tell what engine came in your vehicle when it was new Answer it depends on the year of accent . most of them are all 1.5L SOHC 12V engines except some of the Hyundai Accent GT's which have bigger motors.

User Avatar

It is held in place by two screws, remove them, pull the handle towards you and that should do it.

User Avatar

There should be a slot on the dash marked passenger airbag. You will have to use the ignition key to turn it on.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.