Want this question answered?
A braided wire is less likely to break than a solid wire. Also it can bend sharp corners easier than solid wire. <<>> The use of braided wire is to act as a shield on analog cable sets. The braid can be 50%, 75% or 100% shielding. The braid is grounded only at one end so as not to conduct a current through mutual inductance from other wires. Its function is to protect the signal wires in its cable from magnetic interference from adjacent non shielded cables. The wires inside the shielded cable are stranded where as the braided shield is very fine solid wire woven together to form a shield over the entire cable set. Another example of a braided wire would be a coaxial cable.
When you get wire that is a shielded pair, you get two individual conductors that are each individually insulated from each other, and the pair is twisted and wrapped with a thin layer of foil to provide electromagnetic shielding to the pair. Occationally you'll see the pair is surrounded with a braided shield, but not commonly. That's your shielded pair.
A loom
Screw terminals, braided eyelets, plugs and sockets, insulated screw connectors, wire clip connectors (wire push-ins), twists inside wire nuts, plain wire soldered joints, soldered wire joints to posts and soldered legs for integrated circuits on printed circuit boards.For more information see the answers to the Related Questions shown below.
The first weaving machine, or power loom, was created by a British man named Edmund Cartwright in the 18th century. He patented it in 1785.
A stream is termed a braided stream because instead of having one main channel there are many parallel branches of the stream flowing near each other, forming a inter-weaving system of stream branches that resembles hair weaving in and out in a braid.
No. Braided wire is not considered "current-carrying". It is not sold or maufactured via AWG specs. It is manufactured via weight per foot. Braided wire is used for grounding purposes only.
An individual would use a braided hose instead of a traditional wire covering if the wires being covered needed more protection. The braided hose is stronger than a wire covering.
A braided wire is less likely to break than a solid wire. Also it can bend sharp corners easier than solid wire. <<>> The use of braided wire is to act as a shield on analog cable sets. The braid can be 50%, 75% or 100% shielding. The braid is grounded only at one end so as not to conduct a current through mutual inductance from other wires. Its function is to protect the signal wires in its cable from magnetic interference from adjacent non shielded cables. The wires inside the shielded cable are stranded where as the braided shield is very fine solid wire woven together to form a shield over the entire cable set. Another example of a braided wire would be a coaxial cable.
yes theres an braided ground wire that bolts to the transmission bell housing
idont know hwat it means
coaxial cable
Twill is a weaving pattern. Cotton used in twill weaving is a staple commodity.
The sediment load is large and the river gets confused and breaks up into smaller channels with a branching, but braided look.
a rope consisting of three wire strands and three fibre strands layed right handded around a fibre core
the channel which form by the flowing of river in a pattern
True.