To increase horsepower. However, adding a less restrictive air filter will require other modifications in late model motorcycles. You will also need to add a less restrictive muffler and the carburetors will need to be "re-jetted". By simply adding a less restrictive air filter and not doing the rest of these modification you may actually cause more harm than good. Your motorcycle was tuned at the factory using the components as is. When you change one component it affects the performance of the others.
A hypercharger is an air intake cover on a motorcycle, which ducts air through a butterfly opening and over an air filter into the intake of the engine. The most popular one is made by Kuryakyn.
I am not the expert, but an ECU upgrade can add 10-15 hp. Then upgrade your air filter, and intake Then upgrade your exhaust.
if you replace it, it will just sound the same if you upgrade it you will gain about 2-3HP and use more fuel meaning less mileage I HAVE A 2003 TAHOE AND I INSTALLED THE COLD AIR INTAKE AND IT GAVE IT A BETTER SOUND
a k&n filter and the best improvement you can make would be to upgrade the intake manifold to an edelbrock performer tbi and a turbo cities 620 cfm throttle body
There are 2 yas to put a cold air intake on it is to cut out a hole big enough behind the driver side head lights to fit it in there. The next way " more expensive " is to buy a hood or put vents in the stock hood and run that way. The easiest bolt on air performance upgrade is a air ram kit which is simply an open type filter like a cold air intake but not able to get fresh air.
The 1998 Toyota Corolla air intake temperature sensor can be found on the air intake hose. The air intake hose will come from the air intake box and proceed to the engine.
You can start with Cold Air Intake, Then exhaust, then headers and ECU upgrade
Let the air into the intake......
A cold air intake will increase your horse power
Cold air intake is better because it's denser.
An intake air duct serves as a passage for supplying air to an engine, and includes a first intake air passage, a second intake air passage, an opening-and-closing valve, an interlocking member and a coiled spring. The opening-and-closing valve is disposed swingably in the second intake air passage so as to open and close the second intake air passage
air intake sensor or air flow meter which measures the mass flow rate of intake air is located on the air cleaner assembly where the black intake hose connects to the box