i was told by geek squad that it is the blue and white wire. not two wires. single wire that is blue and white striped
To replace the spare tire on a 2006 Chrysler Pacifica you will need to use the wire to hoist up the tire and use the lug wrench to hold it back into place.
The wire has a shortage in it
The wiring color code for an amplifier in a 1998 Nissan Pathfinder is blue or blue and white. This is the amplifier turn on wire.
It is the amplifier enable - turn on wire. Basically if the radio comes on power (voltage) goes on this wire to tell the amplifier to come on. And the amp is under the driver's seat.
What do you mean charge the amplifier? It's not a battery, so you just turn the stereo on. When the stereo goes on, the remote wire will turn the amplifier on and you're good to go.
Bulb not installed correctly, broken wire, blown fuse, switch,
it should be the blue and white wire
As always, either the power antenna or the remote turn-on for an amplifier.
it provides a signal to your subwoofer amplifier to turn it on and off with the car's key
Your amplifier should(hopefully) have an input for a "remote turn on" or some words to that effect. Hopefully your deck has either a "remote turn on" wire or a "power antenna" wire coming out the back of it. If it does, you're in business. Extend it to the "remote turn on" on the amp and you should be good!
Speaker wire.
Depends on the output of the amplifier.