Depends on the vehicle type. For a Class 8 truck, you'd be looking at 2 - 3 flag hours. For a light duty vehicle, probably about 2 hours. Estimate labor at about $120 - $150/hour.
I dont know about bike assembly labor rates, but I just got my Gary Fisher Marlin MTB from the Trek store in Ventura, CA for a front wheel replacement. The hourly labor rate was only $5. The rate for assembly is probably a bit more I would guess.
Labor guide book says 2 1/2 hours.
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
Unfortunately no, the wheel bearings are sealed.Additional information: the bearings are part of an assembly that include the hub and wheel/lug studs.Depending on the model year, replacing the assembly is difficult or more difficult.See "Related Questions" below for more
depending ont theyspecific year we charged 350-400 to do it at our shop. if you had the tools and are familiar with such repairs the hub assembly is around $230 or so for a cheap one.
Yes it can be. I think you need to replace the whole hub assembly
This is a common issue with these vehicle sit is 99.9% a sure thing that one of your wheel speed sensors is bad. The problem with replacing this is that you mus replace the entire wheel hub assembly on the bad wheel because the sensor is part of the hub assembly.
Around $75 in parts and $100-150 in labor all varies
The rear wheel torque spec for a 2001 Dodge Neon is 160 foot pounds.
If it is 4x4 remove axle from wheel bearing assembly and then remove the wheel bearing assembly. Make sure the tone ring (looks like a ring with teeth) is still attached to the spped sensor side of the bearing, if not, replace wheel bearing assembly with an assembly that comes with the speed sensor. Replacing a speed sensor without a tone ring is pointless because it won't work.
If this has the locking tilt wheel it is better to find a salvage yard and get the entire steering assembly . Can get for around $100. Parts and time for replacing the Ignition assembly if you can do it at all will not be worth the effort.
40 bucks carquest