Want this question answered?
The 2005 Chevrolet Malibu axle nut torque specification is 60 pounds. Over torque in the axle nut will cause the will bearing to fail.
177 FT. LBS. on axel nut.
177 Ft LBS. of torque.
200ft. pounds
100 ft/lbs
95-105 ft lbs.
The torque for the rear axle nut on the 1996 Magna is 63 ft-lb. That's from the Honda Service manual. Hope this helps you out.
177ft. lbs
87 lb-ft, +- 7 lb-ft. That's about 119 Nm.
You torque the hub nut to 160-170 Inch lbs. While rotating the hub continuously. Then back the nut off 1/2 turn. Rotate the axel several turns (this will set the bearing properly.) Then Torque the nut to 108-144 Inch lbs.
68nm. If you do the math, that comes out to 50.1 foot lbs. Hope you ate your Wheaties!
Front: 233 Ft. Lbs. Rear: Final Torque, 173 Ft. Lbs.