The temperature should be set according to your comfort preferences. The temperature at which most people feel comfortable is in the range of 68°F to 72°F. Setting the furnace temperature higher will result in increased operating cost, as heat is lost through air leaks and radiation, especially when the temperatures outside are low and when it is windy.
It is possible to run the furnace at much lower temperatures to save money, in the range of 58°F to 68°F, if one dresses warmly and doesn't mind wearing bulky clothing indoors during the winter.
Remember that thermostats have a built-in temperature hysteresis, or "swing". Whatever temperature you choose, the furnace will operate a degree or two above and below the setpoint, so if you set the thermostat to 70°F, you'll observe the room temperature cycling between, say, 68°F and 72°F. This is normal. The hysteresis value in many electronic thermostats can be adjusted by the user according to preference. A larger hysteresis value results in the furnace cycling less frequently, but running longer once it comes on.
Set thermostat to desired temperature; lets say, 70 degrees Fahrenheit, a few seconds will go by then the furnace should activate. Once the furnace heats the room to the set temperature the furnace should shut off.
A device for regulating furnace heat is the thermostat. A programmable thermostat can be set to control the temperature inside the home on a regular schedule. The thermostat is set to a desired temperature and then the furnace turns on and off to accomplish the desired heat level.
Depending on your temperature setting, usually the best is about 70 degrees, it's best to set the thermostat, and leave it at a constant setting. Resetting your thermostat to higher temperatures requires the furnace work harder, and will usually increase your utility bill.
Water leaking from a furnace most likely occurs from the heat of the furnace which transforms into a liquid. The best way to avoid the leak is to put your furnace at a lower temperature.
Its because air is forced into the furnace to increase temperature. Steve.
Air flow may be restricted by a dirty filter or air registers blocked.
ou don't. ONce you finish the quest for the elemental furnace, it's stays that temperature. Contribute me.
25-25.5 Celsius is the best temperature
There is no set temperature at which gas should be in order to work best for automobiles. It is best cooler.
One of the hottest furnaces is the solar powered furnace in the Basque region. It can reach a temperature of almost 3,500 deg C.
78
You could use a thermocouple.