Limescale consists mostly of calcium carbonate, which is insoluble in water. Vinegar contains acetic acid, which reacts with the calcium carbonate to produce calcium acetate, which is soluble in water an easily washes away.
Regular cleaning can prevent buildup of staining material. Repair leaking, dripping faucets to stop staining.
Lime or hard-water mineral buildup is dissolved by an acid. Vinegar or lemon juice may be rubbed over the stain, to dissolve. Do not leave on stain too long, as acids will eventually damage surface of porcelain enamel. Rinse thoroughly. Commercial products designed to remove lime deposit may be used if label says safe for the surface. Do not use acids on fiberglass, nor any commercial product unless label says safe for fiberglass.
[Info from the Home Maintenance And Repair Database at the Michigan State University website]
Best thing I've found is a product called C-L-R and it works like a charm.
White vinegar has been proven to work to remove hard water stains from faucets. See the step by step method below:
Natural Formula to Use:
Pure white vinegar
Method to Use:
1.Fill a clean spray bottle with pure vinegar
2.Spray the vinegar freely over the faucet and wait for a few minutes
3.If stains are stubborn spray more vinegar and wait a while longer
4.Simply wipe away with a clean cloth to reveal the shine
Tips:
Sometimes stains are extra stubborn - for this make a paste of white vinegar and baking soda and scrub gently with a soft brush or sponge. Never use an abrasive cleaner like scouring pads, powders or steel wool as this will scratch the surface.
You may also put some vinegar into a baggie and tie it to the end of the faucet, which will keep the contact of vinegar on the faucet.
White vinegar is very effective.
White vinegar has been proven to work to remove hard water stains from faucets. See the step by step method below:
Natural Formula to Use:
Pure white vinegar
Method to Use:
1.Fill a clean spray bottle with pure vinegar
2.Spray the vinegar freely over the faucet and wait for a few minutes
3.If stains are stubborn spray more vinegar and wait a while longer
4.Simply wipe away with a clean cloth to reveal the shine
Tips:
Sometimes stains are extra stubborn - for this make a paste of white vinegar and baking soda and scrub gently with a soft brush or sponge. Never use an abrasive cleaner like scouring pads, powders or steel wool as this will scratch the surface.
Limescale is basically calcium carbonate or similar. Descaler is basically acid. The acid reacts with the calcium carbonate forming a more soluble salt which easily washes away.
no, limestone is not alive because it is not a mineral
Quick lime or burnt lime is chemically known as Calcium oxide (CaO)It can be prepared by 'burning' or heating marble or limestone to above 825 °C, that contain calcium carbonate (CaCO3; mineral calcite) in a lime kiln.CaCO3 --> CaO + CO2(gas)
lime stone
CLR calcium lime and rust remover in a dish or glass large enough to submerg the entire head.
Use a commercial lime remover or mild solution of muratic acid, mixed to about 5%. You can also use vinegar. To prevent the deposits from forming, use soft water or distilled water.
Vinegar is the only safe solution for removing lime deposits from painted surfaces.
Lime buildup in your water lines. No, it wont hurt you.
To clean calcium and lime deposits from faucets you need some vinegar, a rag, and an old toothbrush. Soak a rag with vinegar and wrap it around the faucet. Let it sit for a few hours. Take an old toothbrush and dip it in vinegar. Gently scrub the deposits and wipe clean. To keep the deposits from coming back, you can spray them down with vinegar once a week, let it sit, then wipe them clean.
Lime away. Lime away does not work on hard water deposits.
There is a product called CLR which is available in grocery stores which removes lime deposits.
CLR (Calcium Lime Rust, a cleaning product) is good for removing rust and other deposits and effects from running water. In areas around the bathroom and kitchen where there is running water, it's excellent for removing things like that.
Vinegar or CLR
The acid tells you wether or not te mineral contains lime. Drip any (strong) acid onto the mineral, and if it starts bubbling, the mineral contains lime. It's often used by people who have a fishtank, as rocks which contain lime are bad for most freshwater fish.
soak it in CLR for awhile, then use an old toothbrush to scrub off the lime you can get CLR at any grocery store, in the laundry soap aisle
vinegar will work if you can soak it. The product called CLR (Calcium, Lime, Rust) works in very short order. We use it to clean our indoor fish ponds. It does need to be rinsed very well once it has removed the deposits.
Calcium and lime deposits will cause this .
lime stone