With thinset.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
I would use a latex screed. like cement but with a latex binder, add water pour 5- 10mm on to the concrete and it self levels.Dries in about a day.Put a poylthene membrane down first if damp is a problem
No, I would try to avoid that at all costs. If you do it, it will crack. It's best to remove the existing tile and smooth out subfloor before installing any tile, and most especially for installing marble which is very fragile.
Generally you would put the trim on after the tile is done. Especially if you are laying ceramic tile and need a mud base or cement board. If the room connects to another without tile, I would do the trim first. For example, the kitchen has tile and it flows directly to the dining room that has wood down and won't be replaced. If you put the trim down after the tile, the trim in the kitchen will be at least 3/4" taller then the dining room. This is only an issue when you have a really open floor plan.
Tile is glued onto a surface and then grouted. Both of these processes make it stay put very well. You can break it up with a sledge hammer, but then you will also need to replace the drywall. If you are redoing a shower or bath area, replacing the drywall usually needs to be done anyway.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
Yes, you can put rug over ceramic tile.
You have to put a cement board like Hardibacker, Wonderboard or Durock over the ceramic tile.
I want to put ceramic tile flooring in my kitchen but i don't know how to measure the footage. What is the formula for measuring square footage for ceramic tile?
yes just prep your your tile with ardex
Home Improvement with Eric Stromer - 2006 Put in Your Ceramic Tile Kitchen Backsplash was released on: USA: 21 August 2008
If they are glazed, you can write on them, but it will wipe off fairly easily.
Can you and should you are two different things. You could, but you wouldn't be happy with your results. It's always best to remove all old floor covering prior to installing new ceramic tiles. Whether you buy expensive tile or find cheap ceramic tile for sale, you always want a clean and solid surface to start with.
Take a pic, buy some tape...
No, I would try to avoid that at all costs. If you do it, it will crack. It's best to remove the existing tile and smooth out subfloor before installing any tile, and most especially for installing marble which is very fragile.
I would use a latex screed. like cement but with a latex binder, add water pour 5- 10mm on to the concrete and it self levels.Dries in about a day.Put a poylthene membrane down first if damp is a problem
There are a variety of choices. Determined by preference and asthetics, one might opt for indoor/outdoor carpet or ceramic tile. if you decide to install ceramic tile make sure that you use one that is grade 6 because is ready for winter,and make sure is a floor tile, many people put wall tile on the floor and the is not the right choice, also try tu use a good bonding thin set.and if you get snow ins this room, then use a tile with texture on it.