buy a haynes manual, it is better at describing the process in beginner language and you get pics too
haynes manual
To change the oil pan gasket on a 1999 Mazda Protege DX, remove the bolts holding it to the bottom of the motor. Take the old gasket off and clean the area where the gasket sits with a gasket cleaner. Place a gasket sealer on the outside lip, then put in the new gasket. Carefully replace the pan and tighten the bolts, being careful not to let the gasket overlap itself.
need to replace the intake manifold gasket
You have either a blown head gasket or a cracked head
Gasket between engine block and cylinder head
If the engine is run while the gasket is blown, the engine will overheat and eventually blow or seize up. If the gasket blew and engine was soon after turned off, there may be no further damage to the engine. Replacement of the gasket can get this engine in working condition.
If you get a new engine it will have a new head gasket
Sure you CAN, but if you do continue to run an engine with a blown head gasket you will destroy the engine. Do not run any engine with a blown head gasket or you will be buying a new engine.
The manifold gasket is the same as the plenum gasket. The manifold gasket is a barrier between the manifold and the engine block.
its not a leak by the egr but a leak in it..... you need a new egr and gasket. hope that helps
No. You can have the head gasket replaced. This is unless you kept driving the car with a blown head gasket and have totally destroyed the engine.
Sure it will start with a blown head gasket. But, if you continue to run this engine with a blown head gasket you will destroy the engine.