There are 8 bolts per head in a box pattern. Start with one of the two center/top bolts, then bottom opposing center, straight up to top, bottom opposing again, then to top opposing outside, cross again to bottom opposing. A criss cross pattern from center to outside. Torque is done in 3 steps, 1st to 22 ft. lbs / 2nd to 51-55 ft lbs / 3rd is 90 degrees more (1/4 turn).
about 12o lbs per cylinder
How_do_you_change_the_dash_bulbs_on_a_1995_Ford_Broncohear how it is done in a 92-96
yes
it sounds like your exhaust manifold gaskets are leaking or you half a hole in your Y pipe
Drive to an exhaust shop
The wheel bolt pattern for the 1979 ford bronco is 5 lugs on 5.5 inch distance.
The bolt pattern on a Ford Bronco or 1/2 truck (F150) is 5 on 5.5 (5/5.5).
Six, one per cylinder.
15426378 #1 cylinder is on right front
one for every cylinder.
5X5.5
it is 5x5.5