Want this question answered?
48 hole bolt tightening seqence
bolt pattern is: 4X114.3 - four hole.
measure the center of one hole to the center of the opposite hole. that measurement is the second number of the bolt pattern. the first number simply how many bolts there are. So, 5 X 5 1/2" means there are 5 bolts and the distance from one bolt hole to the opposite bolt hole is 5 1/2"
Its the size and distance between holes on your rim. Hole Pattern.
It will not fit without an adapter. The 5 in that number refers to the quantity of bolt holes. The 139.7 refers to the distance between adjacent bolt holes in the pattern. In other words the distance between the upper most bolt hole and the lowest bolt hole in the pattern. Obviously, if the distance between the bolt holes is off by 25.7mm, this wheel will not fit. The only option is to purchase a bolt pattern adapter commonly referred to as wheel adapters, to change the bolt pattern of your vehicle.
to measure the bolt pattern on any given wheel, you measure the two lug holes which are furthest apart. If you had a 5 lug wheel, and the star pattern were standing straight up, you would measure from the center of the top hole, to the center of the bottom right or left hole. For a 2001 Honda Accord the bolt pattern should be 4x114.3 for the 4 lug wheels, and 5x114.3 for the 5 lug V6 models.
It's either a 5 on 5 bolt hole pattern or 5 on 5.5 bolt hole pattern. Call one of the local dealers, they can give you the correct bolt hole pattern, they are the same for many Jeeps year to year.
5 hole x 5.5 inch bolt circle on 1/2 ton
4 x 43/4
For 1987 - 1996 Dakota trucks : It is recommended that bolt and hole threads first be chased with appropriate taps and dies (dirty or damaged threads can affect torque readings). Also recommended is to coat the bolt threads with non-hardening sealant such as Permatex no. 2 or similar product. Install the all of the bolts finger tight to start. Then tighten in several steps to 50 ft-lbs in the following pattern (from 1 to 8 in order) --- 7 - 3 - 1 - 5 (top row) 8 - 4 - 2 - 6 (bottom row) Now repeat the same tightening sequence and pattern in several more steps to 105 ft-lbs to finish the job.
5 bolt 5.5" with 108 mm center hole H offset means sets in closer to vehicle
yes they will they have the same bolt hole pattern