if it's a 3.0 the exhaust manifold torque is 15-22 ft.lbs. if it's a 2.3 it is done in 2 steps: 1) 5-7 ft. lbs. 2) 20-30 ft. lbs.
02 sensor is either in exhaust manifold, or in exhaust pipe between manifold and muffler
your oxygen sensor should be located on your exhaust manifold or on the exhaust pipe near the exhaust manifold, Make sure your engine is cool before placing your hands on the exhaust manifold, It can be very hot!
First start from middle out. 32 foot pounds. then repeat with 64 foot ponds.
Leak in exhaust system?
The spark plug torque spec range is between 6 and 10 ft/lbs.
If you mean the nuts holding the axle/bearing assembly, I believe they should be torqued to 230 foot-pounds, or one 160 pound person standing (not jumping) on the arm of the wrench 1.4375 feet from the center.
The curb weight of 1992 Ford Tempo is 2,600 pounds. This car is 68.3 inches in width and 177 inches in length.
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
no you will have to use a torque head bit and possibley a impact driver depending on how tight it is.
tempo was sentenced in 2002 for 24 years.he was a "drug dealer"bad boy!!!
The 1990 Ford Tempo base sedan has a curb weight of 2,587 pounds. The base sedan came with a 2.3 liter, 4-cylinder engine, and had a 3-speed automatic transmission.
Tempo primo: first tempo. You changed tempo earlier, now go back to the original tempo