Caster setting, degrees, +1 to 3.
Camber setting, degrees, 0 to +3/4.
Toe-in setting, inches, 0 to 1/8".
A caster camber gauge measures the caster in each wheel. The measurement has to do with wheel alignment and degrees of track on the tire.
left front: 4.0 degrees positive caster 0.5 degrees positive camber right front 4.5 degrees positive caster 0.5 degrees positive camber total toe in: .10 degrees good luck
The Integra has camber and toe adjustment but no caster
For the front wheels the caster setting is 3.15 degrees and the camber is 0 degrees with a toe in of 0 inches. For the rear it is -0.5 degrees of camber and 0.08 inches toe in.
Setting up a camber caster gauge is not a very difficult task, and there are several places that can give you step-by-step directions. The following video gives you instructions on how to install a camber caster gauge on your car: http://www.ehow.com/video_2327625_set-up-camber-caster-gauge.html.
Caster, camber and toe are part of the front end and steering alignment.
Caster 2 to 4 degrees Camber -1 to 1 degrees Toe 0 to .2 inches
{| ! ! ! ! ! | |}
A caster camber guage is one of the easier guages you can read. It is all digital and it can read 0.1 of a degree out of a 20 degree area.
lowering coils or coilovers. camber/caster balljoints on the front. strut cambolts on the rear.
Toe, caster and camber.
Caster, Camber and Toe.