0
What else can I help you with?
What is the correct Timing for a 1986 Chevy blazer with a 350?
8 to 10 degrees.
What is the ignition timing on a 1986 Chevy Blazer?
It should be 6 degrees before tdc, just make sure you disconnect the distributor's computer control wiring harness before you adjust, and check the timing with a timing gun.
What is a code 42 on a 1986 Chevy blazer s10 how do you cure it?
C3I ELECTRONIC SPARK TIMING (EST) FAILURE is code 42 timing can be off by a lot of factors check vacume leaks plugs wires etc..
Where are the timing marks on an 1986 K-5 Blazer 305 ci?
The timing mark on all 305 to 400 small block Chevrolet engines from 73 to 87 is on the hamonic balancer which is the pulley behind the crankshaft and has no belt grooves...smooth with a split line on it....that line is the timing mark.
Where can you get detailed instructions on the firing order and the correct timing for a 1986 Chevrolet Blazer with pictures?
try searching google for the FSM for your vehicle to download. I found mine for free...very helpful
Does a 1986 Chevy s10 blazer have ignition points?
No.
Can you swap the gas tank from a 1986 blazer to a 1987 blazer?
Yes you can. There the same. Just take the parts / sending unit out of the 1987 tank and install them in the 1986 tank.
When do change the timing belt on a 1986 corvette?
there is no timing belt it has a timing chain
What is the firing order for 1986 k5 blazer 5.7l?
18436572
Did 1986 Chevrolet Blazer come with catalytic converter?
Yes
Where are the timing marks on a 1986 K5 Blazer?
On my K5 the timing tab was not there I had to buy one from a parts store.AnswerOn the k5 I have there was no timing tab I had to buy one from a parts store. TDC mark is white or just a cut. This is found behind the fan nearest the motor. It can be hard to see. When you find it mark it with something white (white out, paint, ect.)
Where is the timing mark on a 1986 Mercedes 190e?
The 1986 Mercedes-Benz timing marks can be found on the main pulley. The timing marks will be scattered around the outside of the pulley.
