0
What is the compression ratio for a 350 with 64cc heads and 7.00 dome pistons?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will double hump heads make any power on a 305?
If you're talking about a stock compression short block that came with 58cc heads, the old 64cc double hump heads would lower the compression ratio and make less hp.
Benefits of putting Chevy 305 heads on a Chevy 327?
Higher compression ration which can increase hp. I installed 49cc heads on my 305 instead of the 64cc and got a higher compression ration and a fair amount of hp gain.
305 heads on a 327 block?
If the oil and water galleys match up, and it bolts to the block fine you should be good. You will probably get a very high compression ratio from this set up.. I had a small block .305 and I switched out the stock 64cc heads for a pair of 49cc heads I got a much higher compression and gain in hp. You really need to analyze the heads and block in question and surf the forums for a better answer.
58cc or 64cc Chevy cylinder head which is best?
Best for what. 58cc come off 305's. 64cc come off 327's in the hi compression era. The question to ask is what will your particular engine have for compression ratio with the head you choose. 400 stock blocks run 76cc to equal 8.5 to 1. So it all depends.
What kind of work has to be done for the olds 350 heads to work on the 307?
Nothing needs to be done to make them fit. The only problem you would have is the compression of the engine. Anything larger than a 64cc combustion chamber will lower your compression quite a bit. Do some research and find the small chamber heads or look into having a set milled to spec.
How much hp does a 350 Chevy have 30 over 292 cam 64cc pro comp heads ported and polished flat top pistons stock stroke roller rockers and 780 double pumper?
400 hp give or take..my friend has a machine shop and has very good luck with pro comp heads..
How many ounces is 64cc?
64cc is 0.064L
How much hp 350 10.5.1 pistons 64cc heads bored 40?
I have a similiar setup, but depending on the style cam and intake you should be looking at around 375 to 400 hp. which in a smaller car such as a nova or camaro will put you in your seat espcially with a 4 speed and low gears
Can you put a set of camel hump heads with 1.94 1.50 .valves off a 350 on a 305?
Yes, but it will drop the compression a little (64cc vs. 58cc chambers), and the bigger valves will make more top end at the expense of some low end torque. Also, if they really are camel hump heads (never heard of camel hump heads with anything other than 2.02, 1.60 valves)they may not have accessory holes drilled in the ends. It's probably not an upgrade.
What chamber size is a 14102191?
64cc
Does the Oldsmobile 350 heads add more compression to the Oldsmobile 307 motor?
Most 350 heads had 64cc combustion chambers. On pre-86 307's, it would bump you up to 8.2 (from 8.0:1). post-85 307's it would get you 8.4:1. On post 85 307's you'd have to change your intake to either the 350 intake or an A4 aluminum. The ports are tiny on post-85 A5 intakes.
What would you estimte the horsepower at with a 350 4bolt main bored 060with a corvette ls8 crank and cam with 1966 327 camelback heads with 64cc chambers edelbrock 600cfm carb?
Around 375
