answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2006-07-09 18:50:54
2006-07-09 18:50:54

Let me say first backwashing is a process for simply ridding the filter of dirt, once you backwash the pressure and cleanness of the filter will begin to collect and store more dirt from the pool, Look at the gauge at the filter remember the pressure or write it down as the pressure goes up the flow of water going back to the pool will go down to the point that very little water will go back into the pool. When the pressure is low the water flow from the filter will be high meaning that the filter is not clogged or dirty.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


To winterize your inground swimming pool, first backwash the filter, and then disconnect the pump. Purchase winterizing chemicals for the pool water, and be sure to use a pool cover.


How big is the star dust inground swimming pool.


form_title=Hire a Swimming Pool Contractor form_header=Install a swimming pool in your back yard for hours of fun and enjoyment. What size of pool are you looking to get?=_ Will this be an inground or above ground pool?= () Inground () Above


You will need to backwash the pump, and then rinse out the filter.


One can get good inground swimming pool by acquiring good inground swimming pool kits. These kits are available online and simple internet search can give you contact details of manufacturer and supplier of good inground swimming pool kits.


You can install a inground swimming pool by getting a timer kit at your local home improvement store.



You don't drain an inground swimming pool, unless you are trained to do so. Doing it alone or even with assistance is extremely dangerous. Save yourself some trouble and go contact a local and trained swimming pool cleaning service.


They don't make them for in ground.



Outdoor pool Inground pools.




Call a local pool store and ask what they recommend in lieu of draining the pool.


Backwashing a swimming pool cleans out the sand filter. It reverses the flow to push all the trappings from the filter out.


To remove excess rain water in an inground pool, you likely want to get a filter. You can also install a drain at the very bottom of the pool, but this will need to be closed if there were water in the pool for swimming.


In california a 25 X 45 inground pool will cost from 25k to 35k. The actual price will be determined by the contractor you hired so shop around.


Well you need to go to a pool store so they can tellvyou what to o


Yes, I know some friends with an inground swimming pool and they have had it for quit some time now. I am pretty sure that they last more than an above ground.


Some pool companys are not in business. most all inground pools have the same size treads..


In most cities such a structure as an inground pool will require a building permit. You will have to contact your local city hall to find out for sure.


The wall is steel and concrete so the short answer is that you do not.


Zodiac Fusion with Nature 2 and chlorine generater


You may have to check the seals in the multyport on top of the sand filter.


depends on size of pool. the bigger the pool, the more area that is covered by water. by adding more water you increase the pressure that will be administered to your swimming pool. make sense? doesn't to me, but its the truth. Swimming pools do not have PSI per say.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.