EGR stands for exhaust gas recirculation and refers to the valve which acts as the main emissions control in a car. It helps the car burn fuel efficiently.
A valve which requires pressurised air to operate (open or close) is known as pneumatic valve. A valve has a valve base through which the media (could be be air, liquid, steam, gas...) flows and a actuator mounted on the base which helps operate the valve. This actuator could be of pneumatic type. (or elctrically operated motorised type)
You mean GLOBE valve and that would depend on the size of the valve and the maker
I would use a butterfly valve to set the flow and a pitot tube to measure it. Nexus Valve makes a good one and it is price competetive as well.
Never. Throttling will erode the valve seat and then the valve will never shut off completely.
Relief valve always position in the suction line in oreder to relief the extra pressure, while safety valve is always placed at discharge line to release excess pressure.I would take that one step further by stating that a " RELIEF VALVE" is one that is "meant" to be lifted off its seat, as opposed to a "SAFETY RELIEF VALVE" which is not!DIFFERENCE BETWEEN RELIEF VALVE AND SAFETY VALVE:1. Releif valve is applicable in the fluid system.safety valve is applicable in the gaseous system.2.Relief valve opening is directly proportional to the pressure rise.Safety valve opening is will happen at after reaching the setpressure.3.Mode of relif vlave line is again connected to the suction.But in the safety valve is just vent-out there is no connection tosuction.
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
Yes, the EGR valve, or port EGR
It doesn't have an egr valve.
As I recall, that engine does not have an EGR valve.
There is no EGR valve on an Aspire.
There is NOT an EGR valve on this engine.
does a Hyundai tiburon have a egr valve
On the egr valve.
It doesn't have an Egr valve.It doesn't have an Egr valve.
The PCM controls the EGR valve, so the EGR position sensor tells the PCM what position the EGR valve is in, so it can control the EGR valve and ake other necessary adjustments.
The 2002 Mercury Mountaineer EGR valve can be found in the engine compartment, on the firewall. The EGR valve will be labeled as such.
The EGR valve is located on the top of the 1985 Mustang engine. The EGR valve is mounted right behind the carburetor.