Port 2
port 2512 for server-to-server directed communications and port 2513 for CMC
An address does not define a port. Many kinds of communication could be directed to/from that address that would communicate on different ports. If you are asking about the port for HTTP protocol, it is port 80.
Identifies the port number of a destination application program.
At the server, the port numbers distinguish different services - the server can distinguish which of the messages it receives should be sent to the FTP server, which to the DNS server, to the WWW server, etc. For example, communication with a Web server would typically use port 80.At the client side, the port numbers distinguish different communications. For example, if I open 3 Web pages in my browser, and communicate with the same Web server, the destination port would of course be 80, but the origin port might be three different numbers such as 1024, 1025, 1026. Then, when the server sends the reply back, my browser knows to which file each incoming packet should be added.
The source MAC address within a frame is used by the switch to associate a port with that MAC address. Frames are directed by the switch from one port to another based on the destination MAC address within the frame.
This is copied in from a test with a provided exhibit. It cannot be answered without it.
Communication Port.
Port Triggering opens a port when a PC on the network initiates communication through another port.
Your dum to not no the answer.
Information used are the source port number, the destination port number and ip addresses.
What port is used for communications between Tomcat and the Web browser accessing the ePO console is accomplished using
It's better known as Port of Discharge and it's abbreviated as POD.