answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2013-06-24 13:40:37

The throttle cable goes from the 'gas' pedal to the carburetor or throttle body to control the speed of the engine. On cars the brake cable goes to the emergency brake, on some motorcycles the brake cable goes to the brakes. (The main brakes for cars and some motorcycles are hydraulically operated, not by a cable.)

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


describe Difference between coaxial cable and twisted pair cable? describe Difference between coaxial cable and twisted pair cable?


I had a stuck throttle on my 1996 Passport. The throttle cable had a piece of protective black rubber around the throttle cable between the outer cable covering and where the cable connects to the throttle body. The rubber had began to come apart and some of it was getting inside the throttle cable covering, causing the throttle cable to bind. I removed the rubber piece and cleaned out the cable by covering it with GOOF-OFF and then sliding the cable in and out until my cleaning rag was clean when I wiped off the cable. I did not replace the rubber piece and have had no problems since.


Between Grip flange and throttle cable housing.


The throttle cable is located on top of the throttle body.


The throttle cable is not adjustable.


A push-pull throttle is a very misunderstood thing. It is a dual cable throttle operation where in the pull cable is what opens the throttle plates. And, the push cable along with a throttle return spring is what closes the throttle plates.


The throttle cable does not go from the transmission to the throttle body.


Difference between coaxial cable and STP cable used for computer networking?


There is no adjustment on the throttle cable.


On the throttle body, opposite of where the cable attachOn the throttle body, opposite of where the cable attach


how to replace throttle cable on grizzly 600


# The engine will rev high and not easily drop back to idle# The gas pedal will not operate smoothlyI'd say this isn't a very common problem, but the cable is easily accessed at the throttle body for trouble-shootingA sticking / binding throttle cable is either the throttle body sticking, or the cable itself.It's pretty easy to disconnect the cable end from the throttle body to be able to figure out which one is sticking/binding.What you find out will determine which direction to go next - a bent or obstructed cable between the gas pedal and throttle body, or diagnosing the throttle body itself.


On the throttle body, opposite of where the cable attach,On the throttle body, opposite of where the cable attach,


You can't adjust the TPS, but there is a way to adjust the idle if thats what you want. Right next to the brake master is the throttle cable and with your fingers spin the black plastic nut on the cable to desired rpm.


There is not speedometer cable on a 1996 Honda Civic. There is a throttle cable. Top replace this unhook it from the throttle body and gas pedal. Hook on the new cable to snake it through the firewall. Properly hook the throttle cable to the gas pedal and throttle body.


Were can I buy a throttle cable for a 97 geo metro


well its Between the Gear and the Throttle there you can find the Kick-Down Cable


This is located on the throttle body. Follow the throttle cable and it is usually on the opposite side where the cable attaches to the throttle body.


The difference between an RGB cable and a VGA cable are that a RGB cable can go into something like a television, where a VGA cable can go into a laptop. An RGB cable has a prong sticking out the end, and an RGB cable has one wire.


the throttle cable itself will have to be replaced. the cable is most likely fraying internally.


The difference between Armored cable and Metal Clad cable is that the MC cable has a EGC (Equipment Grounding Conductor). Both cables are armored, and look almost identical so watch out.


right across from the throttle cable, on the throttle body


on the throttle body opposite the throttle cable


The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.


how do i replace a throttle cable on a 1988 ford ranger pickup



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.