agitator is a stirring machine, a homogenizer is a device that breaks structure in order to make a homogenious solution
what is the difference between license and patent
what is the difference between an assembler and the translator
What is difference between hvac and ahu
no difference
There is no thermodynamic difference between them .
There are slight differences between a mixer and agitator. A mixer has large paddles that thoroughly mix the contents, while an agitator just shakes the contents of the hopper back and forth for less thorough combining.
It will not mixedhomogeneously&the motor will be effected or failed
Top-loaders have two options for swirling the load: an agitator (central spindle), or an impeller (a small bump at the bottom of the bowl). Impellers spin and pulse to turn the washing over, rather than twisting it. Washing machines with impellers tend to be easier to load and unload, but their dirt removal isn't always as good as agitator models.
AGITATOR AGITATOR
An agitator is a device or mechanism to put something into motion by shaking or stirring. There are several different types of agitators, such as manual, a washing machine agitator, and a magnetic agitator.
If u get a top load washer without the agitator like a whirlpool cabrio high efficiency the only difference is about $400. If you are talking about the traditional washer the washer fills up and the agitator cleans the clothes. With the front load and top load HE models they use way less water and friction cleans the clothes.
From: http://www.fixya.com/support/t1942223-one_part_agitator_moves_other_part Remove Dispenser or Cap: Some models of washing machines utilize a fabric softener dispenser that resides on top of the agitator. This dispenser simply snaps onto the top of the agitator. Other styles utilize a decorative cap. To remove the dispenser, simply grab it and firmly pull up. To remove the agitator cap, insert a small flat-head screw driver into the seam between the agitator cap and the upper agitator (mover). Use a twisting or prying action to pop the cap off of the agitator. Remove Internal Debris Cap: Inside the agitator you will see a cap with a raised handle, much like that of your automobile. Simply reach into the agitator and twist the cap while pulling up. This will remove the cap and its o-ring. Remove Agitator Stud: When looking into the agitator assembly, you will notice a single nut in the center of the agitator. Use a socket kit or nut driver to remove this bolt (agitator stud). Remove the Upper Agitator (Mover): With the bolt removed you should be able to remove the upper half of the agitator (mover) by simply pulling up. Sometimes pulling up will actually remove the whole agitator assembly. If this happens, place the Lower Agitator on the floor and stand on the flat lip. Then Pull up to separate the Upper Agitator (mover) from the Lower Agitator. Remove the Cam and Clutch Dogs: When you remove the upper agitator (mover) it contains the cam and clutch dogs. Tun the assembly upside down. The cam and dogs should then come out.
homogenizer.
Commonly there is a cap on the top of the agitator which, when removed, reveals a nut or clip that secures the agitator to the drive shaft.
1. You didn't turn on the agitator, 2. The agitator is broken, 3. There is something caught in the agitator 4. The hose is not connected to the agitator.
The agitator is part on a washer. It is driven by a couple of different methods. The first is that the agitator is splined (grooves that are cut into the metal) and they slip onto the matching splines of the agitator shaft from the transmission. The second is the use of a bell coupling which is splined to the agitator shaft as well and the agitator snaps onto the coupling.
The agitator has two parts. One is the bottom agitator and then you have the top agitator that moves the clothes around. If the top part of the agitator is not moving. You probably need to replace the dog ears. A great sight to look this info up is www.repairclinic.com. I have ordered from them before. Good Luck! Karen