The extruded bar would be produced by pushing molten aluminum through a die. Where as the other option for making the bar would be to cast it in a mould. The extruded bar would probably have smoother sides and would be available in longer lengths.
Answer Extrusion is the process where a metal or a metal bar is pulled through a mandrel to elongate it and/or give it a final shape. Extruded Aluminum is a common form of making small aluminum wire, bars or beams and many varieties of small non-structural, decorative pieces.
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
In order to have your question answered, you would have to state which bar material. Young's Modulus is different and specific to the material to which it is applied. It will be different for steel than for iron or aluminum.
They are too numerous to mention! Steel embedded in concrete is protected from corrosion by the high alkali content of concrete. New concrete is 13-13.2 pH when poured. The chemical reaction that takes place between the concrete and steel forms what is called a 'Passivating Layer' on the steel. This layer, kept intact will prevent rust from occurring on the steel. Google, passivating layer and read. It is very important to keep this high pH during a concrete structures life. One way this is done is to waterproof the concrete. Aluminum doesn't share this characteristic and corrodes quite easily when placed in concrete. This why, if an Aluminum railing post is to be embedded in a concrete a core is extracted, an appropriate filler material is placed in the hole, then the Aluminum is inserted. Filler materials [usually an epoxy] isolate the Aluminum from contact with the concrete and also prevent electrical currents from flowing. If aluminum is IN the concrete, Dissimilar metal corrosion begins day one between steel and aluminum. In short order the aluminum will be a powder. Steel cost less, easier to work with and can be welded conventionally on site.
Rod is circular in shape. If u look it from where it starts, i.e. its cross sectional view it will be circular. It may or may not be hollow. Bar's cross sectional view will be a quadrilateral. Shivangini
Answer Extrusion is the process where a metal or a metal bar is pulled through a mandrel to elongate it and/or give it a final shape. Extruded Aluminum is a common form of making small aluminum wire, bars or beams and many varieties of small non-structural, decorative pieces.
What is the difference between a pub and a resto bar?
I think there is no difference between them. They just do it to get your money.
What is the difference between a bar scale and a statement scale
electrons are shared between all aluminum ions in the bar
Nothing
Wilfred
There are several websites that sell aluminum bar grating. Local hardware stores may also sell aluminum bar grating.
The difference between a bar graph and a double bar graph is...... A bar graph displays one set of data, and a double bar graph compares two different sets of information/data.So should have a key.
the task bar is said to be status bar if we are browsing something on the internet.
what is the difference between toilet soap and bathing soap?
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.